60 EN | OTHER USEFUL FUNCTIONS (cont.) |
Satellite Auto Recording
This function allows you to automatically record a satellite program which is
Preparation: Connect a DBS receiver to the AUDIO/ VIDEO IN or S VIDEO IN
• You can also connect the cable box if it has a timer.
*To use these connectors, you have to select which one to use (☞ pg. 55).
43
NOTES:
1Set timer program on DBS receiver
•For timer programing method, refer to the manual supplied with the DBS receiver.
Load a cassette |
|
2 Make sure the record safety tab is intact. | |
Set tape speed |
|
3 Press HS/STD/LS3/SP/EP ( | ) to set the |
recording speed.
4Engage Satellite Auto Recording standby
mode
Press and hold REC LINK for more than 2 seconds.
The VCR turns off automatically and the
When signals come into the VCR from the DBS receiver, the VCR starts recording
•Each time you press the button, Satellite Auto Recording standby mode turns on and off. When it is off,
IMPORTANT: Be sure not to turn on the DBS receiver before the program starts broadcasting; otherwise, the VCR will start recording when the DBS receiver is turned on.
●While the Satellite Auto Recording standby mode or after Satellite Auto Recording is finished, the VCR will not enter the timer recording standby mode even though “AUTO TIMER” is set to “ON”. (☞ pg. 56)
●If you turn off this VCR while Satellite Auto Recording is in progress, recording stops.
●Video Calibration (☞ pg. 53) does not work while Satellite Auto Recording is in progress.
●Auto Clock (☞ pg. 11) does not work while in the Satellite Auto Recording standby mode.
●The VCR may not record a short portion at the beginning of the program or may record slightly longer than the actual length of the program when Satellite Auto Recording method is used.
●If you engage the Satellite Auto Recording standby mode while the DBS receiver is turned on, the VCR will not start Satellite Auto Recording, and “Err
●If you have connected another component other than a DBS receiver (or cable box) to the AUDIO/VIDEO IN or S VIDEO IN
●Satellite Auto Recording and
●If the
If this is the case, perform “Express Timer Programing” (☞ pg. 38) to
(Some DBS receivers output signals even if the power is off. Satellite Auto Recording is not possible with those DBS receivers.)