EN 29
C | Watching one program while |
| recording another |
|
1 Engage TV mode
During recording...
●Change the TV’s input mode from AV to TV.
2 Select channel for viewing
Select the channel you want to watch, on the TV.
D Showing on-screen display
When “SUPERIMPOSE” is set to “ON” (☞ pg. 56), you can see the current VCR status on the TV screen.
●For more detailed information about the
1 Display VCR status on TV screen
During recording or recording pause, press
OSD on the Remote. |
| SAP STEREO | |
| REC PAUSE | ||
All indications | THU 12:00 AM |
| |
corresponding to the | ] | ||
STD | 33 | ||
current VCR status are | – 1:23:45 | ||
B |
| E | |
displayed for 5 seconds. |
|
|
|
The time counter remains |
|
|
|
on the screen indicating the elapsed time.
●The indications are not recorded.
2 Exit on-screen display
Press OSD again.
NOTES:
●If the VCR is in recording pause mode, “REC PAUSE” is always displayed.
●The VCR status can be also displayed during playback.
E Recording on VHS tapes with S-VHS quality — Super VHS ET
This function allows you to record on VHS tapes with
●You can activate this function only before you start recording on a VHS tape.
●Before recording, make sure “V, CALIBRATION” is set to “ON” (☞ pg. 53).
1 Select S-VHS ET mode
Press
●To disengage the
2 Start recording
On the front panel:
Press REC ( ¦ ).
On the Remote:
While holding REC ( ¦ ), press PLAY ( 3 ).
NOTES:
● You cannot activate the
– while recording is in progress.
– while
– while Video Calibration (☞ pg. 53) is in progress. ●
● To keep the highest quality recording and playback pictures over a long period of time,
● Use of high grade tapes are recommended for
. recordings.
On some tapes, picture quality will not improve even if the S- VHS ET function is used. Check the recording quality before you start important recordings.
●You can play back
●While playing back a tape recorded with this function, noise may appear. (If playback picture becomes blurred or interrupted, use a cleaning cassette.)
●During special effect playback (☞ pg. 31), noise may appear. If special effect playback is performed frequently on a tape recorded with this function, the tape may be damaged and picture may be deteriorated