Magnavox VR401BMG owner manual Reviewing Memorized Channels

Page 14

14 Automatic Channel Setup (cont’d)

Reviewing Memorized Channels

1

Press the MENU button.

SELECT op CHOOSE B

→PROGRAM VCR SET UP TUNER SET UP SET CLOCK

TO END PUSH EXIT

2

Press the PLAY/o button or the STOP/p button to select TUNER SET UP, then press the F.FWD/B button.

SELECT op CHOOSE B
→ AUTO PROGRAMMING
ADD/DELETE CH
CH MEMORY REVIEW		VR601BMG only
TV STEREO	ON	VR601BMG only
2ND AUDIO

TO END PUSH EXIT

3

Press the PLAY/o button or the STOP/p button to select CH MEMORY REVIEW, then press the F.FWD/B button. A list of programmed channels will appear on the screen.

●If all the programmed channels don’t fit on the screen, press the F.FWD/B button to see the remaining channels. Then press the REWIND/s button to return to the first screen of channels.

●If you do not press any buttons within 10 seconds, you will either go to the next screen of channels or you will return to the previ- ous menu.

4

Press the STATUS/EXIT button once or twice to exit.

2-3

	POWER		VCR/TV	EJECT
	1	2	3
	4	5	6
4	7	8	9	CHANNEL
	7	8	9
		0
	SPEED	TIME SEARCH		MEMORY
1	MENU	STATUS/EXIT	CLEAR	SLOW
1	REWIND	/PLAY		F.FWD
	REC/OTR	/STOP		PAUSE/STILL

Image 14

Contents VCR Warranty Verification For Customer UseIntroduction FeaturesSafety Precautions Declaration of ConformityTable of Contents VCR maintenance Before Using Your VCRPutting Batteries in the Remote Control Replace the battery compartment lidHookups Without a Cable Box/Direct Broadcast System Disconnect the antenna or cable from your TVHookups Without a Cable Box/Direct Broadcast System cont’d Plug in the TV and the VCRRecording/Viewing Any Channel Hookups With a Cable Box/Direct Broadcast SystemConnections TV’s Antenna Cable Signal Cable Box/DBSRecording One Channel/Watching Another Hookups with a Stereo TV VR601BMGPress the Menu button. The display shown below will appear Turning on Your VCR2Turn on the TV VR601BMG only Automatic Channel SetupPress the Menu button Automatic Channel Setup cont’d Adding/Deleting ChannelsReviewing Memorized Channels Press the STATUS/EXIT button once or twice to exitFollow the steps below to set your VCR’s clock. Make sure You make each entry within 60 seconds of the previous entryDaylight-Savings Time Language Selection Remote Control Buttons Channel o/p Buttons Remote Control Buttons cont’dClear Button If you select Status ON, then select Counter only on On-Screen Status DisplaysStatus Display example only If you select Status ON, then select Counter only OFFVCR Display Panel Front Panel Rear Panel Read and follow the steps below to play a tape PlayingVHS Quasi Play Back Sqpb RECord light will appear RecordingInsert a tape with its record tab intact in the VCR 1Turn on the TV 2Insert a tape in the VCRRecording One Channel/Watching Another One-Touch Recording Daily Timer RecordingDo each step within 60 seconds of the previous step Timer Recording cont’d Instructions continue onTape Speeds Checking or Cancelling Timer Recordings Rerecording Tape Duplication RF coaxial cablePress the F.FWD/B button so that on appears beside Repeat PlayPress the PLAY/o button or the STOP/p button to select Real-Time Counter Memory Time Search Press the Time Search buttonSuper High Speed Searching LP/SLP Special Effects PlaybackForward and Reverse Searching SP/LP/SLP Viewing a Still PictureAutomatic Operation Features Monitor Understanding On-Screen DisplaysSpecifically… Multi-Channel Television Sound System VR601BMG only cont’d Hi-Fi Stereo Sound System VR601BMG only Please see additional notes onBlue Background Helpful Hints Helpful Hints cont’d Glossary Cable Box/DBS Output Channel 03 orSpecifications Limited Warranty Timer PowerRemote control Audio in/out jacksSupplied Accessories