Read and follow the steps below to record a television program.
1
Turn on the TV and set it to channel 3 or 4, whichever channel the CH3/CH4 switch on the back of the VCR is set to.
2
Insert a tape with its record tab intact in the VCR.
3
If the VCR/TV light appears on the display panel, go to step 4. If
the VCR/TV light does not appear, press the VCR/TV but- ton once.
4
Press the SPEED button until the desired tape speed appears briefly on the screen. (Details about tape speed are on
page 30.)
5
Use the CHANNEL o/p buttons or the Number buttons to select the channel to be recorded.
6
Press the REC(ord)/OTR button once to start recording.
The REC(ord) light will appear.
7
To pause the recording, press the PAUSE/STILL button once. The REC(ord) light will flash. To resume recording, press the REC(ord)/OTR button or press the PAUSE/STILL button again. The REC(ord) light will come on again.
8
To stop recording, press the STOP/p button.
Recording 25
1Turn on the TV.
2Insert a tape in the VCR.
3 | POWER |
| VCR/TV | EJECT |
|
| 1 | 2 | 3 |
|
|
| 4 | 5 | 6 |
| 5 |
|
| 0 |
| CHANNEL | |
4 | 7 | 8 | 9 |
|
|
SPEED | TIME SEARCH | MEMORY |
| ||
| MENU | STATUS/EXIT | CLEAR | SLOW |
|
6 | REWIND | /PLAY | F.FWD | 7 | |
REC/OTR | /STOP | PAUSE/STILL | |||
8 |
|
|
|
|
|
Helpful Hints
•If you press the REC(ord)/OTR but- ton when there is not a tape in the VCR, NO CASSETTE will flash on the screen.
•If you press the REC(ord)/OTR but- ton while a tape without a record tab is in the VCR, the VCR will eject the tape and PROTECTED CAS- SETTE CANNOT RECORD will flash on the screen.
•Other recording options are on pages 26-32.
•You can change the tape speed during a recording, but some distor- tion will appear on the tape.
•The VCR will record in a preset vol- ume.