![](/images/new-backgrounds/1266576/26657617x1.webp)
Hookups With a Cable Box/Direct Broadcast System (cont’d) 9
With this connection:
●You may watch one channel while recording another.
●You may not record scrambled channels.
1 VCR
AUDIO | ANT |
L | IN |
R
VIDEOOUT
CH3 CH4
OUT IN
Cable
Signal
2 | Cable Box/DBS |
| |
| 75 | ||
| ANT / | ||
|
| CABLE | |
| IN |
| |
| OUT |
| |
| RF coaxial |
| |
| cable |
| |
RF coaxial | 3 | TV’s ANTENNA | |
IN Jack | |||
cable |
Connections
1
Connect a Cable signal to the VCR’s ANT(enna) IN Jack.
2
Use an RF coaxial cable (supplied) to connect the OUT Jack on the VCR to the IN Jack on the Cable Box/DBS.
3
Use a second RF coaxial cable to connect the OUT Jack on the Cable Box/DBS to the ANTENNA IN Jack on the TV.
Recording One Channel/Watching Another
1
Put the Cable Box/DBS on the same channel as the VCR’s CH3/CH4 switch. Set the TV to the Cable Box/DBS output channel (03 or 04).
Then, with the VCR in VCR position (the VCR/TV light will appear on the display panel), use the CHANNEL o/p but- tons to select the channel you want to record at the VCR. Start the recording.
2
Press the VCR/TV button once to put the VCR in TV position. (The VCR/TV light will disappear.)
3
Select the channel you want to watch at the Cable Box/DBS.
Helpful Hint
•When you play a tape, make sure the Cable Box/DBS is set to the same channel as the CH3/CH4 switch on the VCR. Set the TV to the Cable Box/DBS output channel (03 or 04).