24 Playing
Read and follow the steps below to play a tape.
1
Turn on the TV and set it to channel 3 or 4, whichever channel the CH3/CH4 switch on the back of the VCR is set to.
2
Insert a tape in the VCR. The POWER, VCR/TV and CST. IN lights will appear on the display panel. If the tape’s record tab has been removed, playback will start automatically.
3
If playback does not start automatically, press the PLAY/o button.
4
Press the STOP/p button to stop playback.
5
Press the REWIND/{ button to rewind the tape.
6
Press the EJECT button to remove the tape.
S-VHS Quasi Play Back (SQPB)
This unit has a SQPB function that allows you to view a tape recorded in
1Turn on the TV.
2Insert a tape in the VCR.
| POWER |
| VCR/TV | EJECT | 6 |
| 1 | 2 | 3 |
|
|
| 4 | 5 | 6 |
|
|
| 7 | 8 | 9 | CHANNEL |
|
|
|
| |||
3 |
| 0 |
|
|
|
SPEED | TIME SEARCH | MEMORY |
| ||
MENU | STATUS/EXIT | CLEAR | SLOW |
| |
5 | REWIND | /PLAY | F.FWD |
| |
REC/OTR | /STOP | PAUSE/STILL |
|
4
Helpful Hints
•If the tape you want to play is already in the VCR, make sure the VCR power is on and the VCR is in VCR position.
(The VCR/TV light will appear on the display panel. If it does not, press the VCR/TV button once.) Then press the PLAY/o button.
•Other playback options and features are on pages 33-41.
•When you play a tape recorded in S- VHS format on this unit, you can not get the high resolution that would be available on an
•If REPEAT PLAY is set to ON, play- back will begin automatically, even when the record tab is intact.