Kenwood DX-7 instruction manual ~.. =J, Connection for analog recording

Page 13

• Connection for analog recording

Use the separately sold AID converter (BP-A7).

•Turn off the power to both the amplifier and this unit before making connections.

•Connect the AID converter unit (supplied in the BP-A71 to this unit.

•Connect the AID converter unit's[MIC/LINE IN] jack to an amplifier's[TAPE REC] jacks or a stereo microphone.

•Connect the AID converter unit's[LINE OUT] jack to an amplifier'sexternal input jacks (AUX jacks, TAPE PLAY jacks, etc.).

Both input and output connections should be made with the red plug connected to the amplifi- er's"R" (right channell jack and the white plug connected to the "L" (left channell jack.

•Use the AID converter unit's[MIC/LlNE] switch to MIC or LINE, depending on the connection.

•Adjust the playback sound volume using the amplifier'svolume control.

•When using a microphone, use a stereo microphone equipped with a 3.5 mm diameter stereo miniplug. If you use a monaural microphone, the sound will be recorded on the left channel only.

REC ouT PLAY BACK

1i:J\ @@

r~H-I------d

~~hite StereoJmicrophone

~.. _=:J

~~~'\~ MIG/LINE IN -====")

Separately sold BP-A7

DX-7 13

Image 13

Contents DX-7 Unpacking Before applying power of AC adaptorUsing headphones Precautions for useCondensation dew Accidental erasure prevention side door Use of OAT cassette tapesOAT tape recording system VElS Controls, connectors and indicatorsOX-7 How to use the unit with the supplied AC adaptor Power sourceFor maximum battery life Using rechargeable batteriesUse the separately sold AID converter BP-A7 Recharging periodConnections Sound volume adjustment Adjustment using the main unitUse the separately sold Car Audio Cassette adaptor CAC Red Connection to an amplifiersanalog input jacks Sound volume adjustmentConnection for analog recording ~.. =JKey Hold function To playa tape To playback a OAT cassette Basic operationTo skip to a desired tune Dpss function To fast-forward or rewind the tapeIDisplay example Repeat play Cue/Review functionConnect the unit See Digital recordingNn UU Analog recordingTo pause recording Stopping/pausing recordingTo stop without recording an END-ID See To stop after recording an END-ID SeeTimer recording Timer recording/Timer playbackTimer playback SeMS ST-IO Start SubcodesTo add a ST-ID to a previously recorded tape To manually write a ST-ID during recordingDisplay example Renubmering tunes To erase an unnecessary ST-ID from a recorded tape~iliC,oc Accessories CleaningCleaning the cabinet Cleaning the headSpecifications