Stopping/pausing recording
•Operation is possible with either the main unit or the remote controller.
•To pause recording
•Press the [PAUSE] button.
If five minutes elapse in pause mode, the rotating head moves away from the tape to protect the tape. (The REC indicator blinks.1
• To stop without recording an END-ID (See page 26)
• Press the [STOP/EJECT] button or press the remote controller's[STOP] button .
• To stop after recording an END-ID (See page 26)
• During recording, press the [FF/CUE] but- ton for at least two seconds. (After the EN
•Erasing a recording
•To erase a tape, set the unit to record mode with nothing connected to the [DIGITAL I/O] jack.
•Do not attach the separately sold AID converter unit.
20