Kenwood DX-7 instruction manual Accessories, Cleaning the cabinet, Cleaning the head

Page 27

Cleaning

•Cleaning the cabinet

Clean the cabinet by wiping with a dry cloth. If an area is particularly dirty and cannot be cleaned well with a dry cloth, wipe the area with a cloth dampened with water, then wipe dry with a dry cloth. (Do not use benzene, thinner, or other chemicals.1

Always keep terminals and plugs clean.

•Cleaning the head

If the head becomes dirty or covered with dust, sound dropouts or noise may occur.

Also, if the head becomes clogged during playback, "Error" will appear on the display and the sound will stop.

In such cases, clean the head with a commercially available OAT-use head cleaning tape.

•Do not inject oil into the unit. This will damage the unit.

If the head becomes worn after long use, it must be replaced. Contact your dealer for the replace- ment (fee required!,

•"Error" may appear on the display if a wrinkled or damaged tape is used or if the head becomes clogged. If this occurs, replace the tape or try cleaning the head with a cleaning tape.

•If this unit is subjected to a strong external disturbance (such as a shock or abnormal voltagel or misoperation, the unit may stop responding to button operations or operate abnormally. In such a case, disconnect the AC adaptor plug, wait about 30 seconds, reconnect the plug, then retry the operation.

• Accessories

(1) Remote controller

(2) AC adaptor

(3) Digital connection Cord

(4) Analog connection cord

(5) Digital-use adaptor plug

(6) Plug adaptor (Except for USA, Ca'nada

 

and UK)

DX-7 27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents DX-7 Unpacking Before applying power of AC adaptorPrecautions for use Using headphonesCondensation dew Accidental erasure prevention side door Use of OAT cassette tapesOAT tape recording system VElS Controls, connectors and indicatorsOX-7 How to use the unit with the supplied AC adaptor Power sourceRecharging period Using rechargeable batteriesFor maximum battery life Use the separately sold AID converter BP-A7Sound volume adjustment Adjustment using the main unit ConnectionsUse the separately sold Car Audio Cassette adaptor CAC Red Connection to an amplifiersanalog input jacks Sound volume adjustmentConnection for analog recording ~.. =JKey Hold function To playa tape To playback a OAT cassette Basic operationTo fast-forward or rewind the tape To skip to a desired tune Dpss functionIDisplay example Repeat play Cue/Review functionConnect the unit See Digital recordingNn UU Analog recordingTo stop after recording an END-ID See Stopping/pausing recordingTo pause recording To stop without recording an END-ID SeeTimer recording/Timer playback Timer recordingTimer playback SeMS ST-IO Start SubcodesTo manually write a ST-ID during recording To add a ST-ID to a previously recorded tapeDisplay example Renubmering tunes To erase an unnecessary ST-ID from a recorded tape~iliC,oc Cleaning the head CleaningAccessories Cleaning the cabinetSpecifications
Top Page Image Contents