Radio Shack PRO-83 manual Traffic Safety, Connecting an Extension Speaker

Page 15

20-501.fm Page 15 Friday, July 9, 2004 3:23 PM

Once you set the volume, do not increase it. Over time, your ears adapt to the volume level, so a volume level that does not cause discomfort might still damage your hearing.

Traffic Safety

Do not use an earphone or headphones with your scanner when operating a motor vehicle in or near traffic. Doing so can create a traffic hazard and could be illegal in some areas.

If you use an earphone or headphones with your scanner, be very careful. Do not listen to a continuous broadcast. Even though some earphones/headphones let you hear some outside sounds when listening at normal volume levels, they still can present a traffic hazard.

Connecting an Extension Speaker

In a noisy area, an optional extension speaker, positioned in the right place, might provide more comfortable listening. Plug the speaker cable's

1/8-inch (3.5-mm) mini-plug into your scanner's headphone jack. Your local RadioShack store carries a selection of suitable speakers.

Warning: If you connect an external speaker to the scanner's headphone jack, never connect the audio output line to a power supply and ground. This might damage the scanner.

15

The Basics

Image 15
Contents Read this user’s guide completely before using your scanner Contents Service search storing frequencies into channels during FCC Wants You to Know Powering your scanner Fm Page 6 Friday, July 9, 2004 323 PM Using Rechargeable Batteries Fm Page 8 Friday, July 9, 2004 323 PM Fm Page 9 Friday, July 9, 2004 323 PM Using AC Power Using Vehicle Battery Power Fm Page 12 Friday, July 9, 2004 323 PM Setting up your scanner Connecting the AntennaConnecting an Optional Antenna Listening Safely Connecting an Earphone/HeadphoneConnecting an Extension Speaker Traffic SafetyAttaching the Belt Clip About Your Scanner Look At the Keypad SCAN/SRCH SVC PGM Look at the Display Fm Page 23 Friday, July 9, 2004 323 PM Channel Storage Banks Understanding Banks Service BanksTurning On The Scanner and Setting Squelch Operating your scannerStoring Known Frequencies Into Channels Fm Page 26 Friday, July 9, 2004 323 PM Fm Page 27 Friday, July 9, 2004 323 PM Searching For Temporarily Storing Active Frequencies Service SearchStoring Frequencies into Channels During Service Search Manually Selecting a Channel Scanning the Stored ChannelsSignal Stalker Setting the Signal Stalker Options Fm Page 33 Friday, July 9, 2004 323 PM Fm Page 34 Friday, July 9, 2004 323 PM Using Signal Stalker About Skywarn SkywarnFm Page 37 Friday, July 9, 2004 323 PM Chain Search WX Alert Turning On the Weather Alert FeatureChain Search Mode Chain Search Hold Mode Program Band Select Mode Direct Entry Search Direct Entry Search Hold Mode Fm Page 44 Friday, July 9, 2004 323 PM Search Skip Memory Fm Page 46 Friday, July 9, 2004 323 PM Delay Locking Out Channels Turning Channel-Storage Banks On and OffLocking Out Frequencies Priority SCAN, FUNC, HOLD, , KEYLOCK, Using KeylockWired Programming Using the Display/Key Backlight Resetting the Scanner My scanner isn’t working at all. How do I turn it on? Frequently asked questionsFlashes on the display. What is it? Error appears on the display. What does it mean? Specifications Glossary Index Earphone Squelch Setting Warranty To-6V, 300 mA DC adapter Accessories
Related manuals
Manual 64 pages 57.43 Kb