Storing Frequencies Found During Chain Search into Channel Memory
You can store frequencies you find in chain search mode or chain search hold mode.
Press FUNC + PGM in chain search mode or chain search hold mode. The lowest blank channel and bank appear.
Press E to store the frequency into the blank channel. To select another channel, press FUNC + 
or 
before you press E. To enter the
frequency, press FUNC. 
disappears. Then press E. You can also press
If you try to save a frequency that is already stored, the scanner sounds an error tone and displays the channel that was duplicated. If you entered the frequency by mistake, press ./CLR. To enter the frequency anyway, press E to accept.
The scanner sets itself to program mode after you store a frequency.
Program Band Select Mode
You can use this mode to define the search range used during a chain search in each search bank. To set the scanner to program band select mode, press FUNC + B.SLCT. SEARCH appears. Then select a search bank.
41 | Beyond the Basics |