Radio Shack PRO-28 owner manual Guide to the Action Bands, Typical Band Usage, Primary Usage

Page 30

20-508.fm Page 30 Wednesday, August 4, 1999 1:50 PM

GUIDE TO THE ACTION BANDS

Typical Band Usage

VHF Band (30.00–300.0 MHz)

Low Range

29.00–50.00 MHz

6-Meter Amateur

50.00–54.00 MHz

U.S. Government

137.00–144.00 MHz

2-Meter Amateur

144.00–148.00 MHz

High Range

148.00–174.00 MHz

UHF Band (300.00 MHz–3.0 GHz)

U. S. Government

406.00–420.00 MHz

70-cm Amateur

420.00–450.00 MHz

Low Range

450.00–470.00 MHz

FM-TV Audio Broadcast, Wide Band

470.00–512.00 MHz

Primary Usage

As a general rule, most of the radio activity is concentrated on the fol- lowing frequencies:

VHF Band

Activities

Frequencies

Government, Police, and Fire

153.785–155.980 MHz

Emergency Services

158.730–159.460 MHz

Railroad

160.000–161.900 MHz

UHF Band

Activities

Frequencies

Land-Mobile “Paired” Frequencies

450.000–470.000 MHz

Base Stations

451.025–454.950 MHz

Mobile Units

456.025–459.950 MHz

Repeater Units

460.025–464.975 MHz

Control Stations

465.025–469.975 MHz

Note: Remote control stations and mobile units operate at 5 MHz higher than their associated base stations and relay repeater units.

30

Image 30
Contents PRO-28 Channel Direct Entry Programmable Scanner Features Fm Page 3 Wednesday, August 4, 1999 150 PM FCC Notice Scanning Legally Contents Troubleshooting Power Sources Using Internal BatteriesPreparation Important Information about the External Power Jacks PowerchargeUsing Standard AC Power Plug the adapter’s power module into a standard AC outlet Using Vehicle Battery Power Charging NICKEL-CADMIUM Batteries Connecting the Antenna Connecting an Optional AntennaConnecting AN Earphone Headphones Traffic SafetyListening Safely Connecting AN Extension Speaker Attaching the Belt ClipUnderstanding Your Scanner Look AT the KeypadLook AT the Display Fm Page 19 Wednesday, August 4, 1999 150 PM Turning on the Scanner and Setting Squelch OperationStoring Frequencies Searching for and Storing Active Frequencies Band SearchDirect Search Search Skip Memory Listening to the Monitor Memory Moving a Frequency from the Monitor Memory to a ChannelUsing the 2-Second Delay Scanning the Stored ChannelsManually Selecting a Channel Locking Out ChannelsUsing the Keylock Listening to the Weather BandNational Weather Frequencies General Guide to ScanningGuide to Frequencies Birdie FrequenciesGuide to the Action Bands Typical Band UsagePrimary Usage Band Allocation Specified IntervalsMeter Amateur Band- 50-54 MHz VHF High Band 148-174 MHz Cm Amateur Band 420-450 MHz Avoiding Image Frequencies Frequency ConversionTroubleshooting Problem Possible Cause RemedyResetting the Scanner Care and Maintenance Specifications Division of Tandy Corporation Fort Worth, Texas