Storing IDs into Scan Lists While Searching
Follow these steps to select a scan list location and store an ID during a search.
1.When your scanner stops on an ID you want to store, press PRI- ORITY. The currently selected scan list memory location flashes.
2.Press E to store the ID in the selected scan list memory loca- tion. Or, repeatedly press s or t to select the scan list memory loca- tion you want, then press E.
3.Press SEARCH to resume search- ing.
Deleting a Stored ID
1.Press MANUAL.
2.Repeatedly press s or t to select the scan list location (shown at the top of the display) you want to delete.
Scan List Location
3. Press 0 then E.
Automatically Storing an ID in a Scan List Location
To display a scan list location and store an ID in that location during a search, press PRIORITY to display the current scan list location, then press E when your scanner stops on an ID you want to store.
To store an ID in the first available scan list location during a search, press E at any time.
32
SCANNING THE SCAN LISTS
Press SCAN to begin scanning the lists you have programmed. SCAN scrolls on the display.
Note: If you haven’t programmed any IDs, SCAN scrolls on the display but your scanner does not stop on an ac- tive conversation.