Radio Shack owner manual FCC Notice, Your PRO-2050 scanner can receive all of these bands

20-430.fm Page 4 Wednesday, August 4, 1999 1:29 PM

Your PRO-2050 scanner can receive all of these bands:

Frequency	Types of
Range	Transmissions
29–29.7 MHz	10-Meter Amateur
	Radio
29.7–50 MHz	VHF Lo
50–54 MHz	6-Meter Ham Band
108–136.975	Aircraft
MHz
137–144 MHz	Military Land Mobile
144–148 MHz	2-Meter Ham Band
148–174 MHz	VHF Hi
406–420 MHz	Federal
	Government
420–450 MHz	70-cm Ham Band
450–470 MHz	UHF Standard Band
470–512 MHz	UHF “T” Band
806–824 MHz	Public Service “800”
851–869 MHz	except
896–956 MHz	Cellular Band

Note: See “Specifications” on Page 51 for more information about the scan- ner’s frequency steps.

4

FCC NOTICE

Your scanner might cause TV or radio interference even when it is operating properly. To determine if your scanner is causing the interference, turn off your scanner. If the interference goes away, your scanner is causing it. Try to eliminate the interference by:

•Moving your scanner away from the receiver

•Connecting your scanner to an outlet that is on a different electri- cal circuit from the receiver

•Contacting your local Ra- dioShack store for help

If you cannot eliminate the interfer- ence, the FCC requires that you stop using your scanner.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interfer- ence, and (2) this device must accept any interference received, including interference that may cause undesired operation.

We recommend you record your scan- ner’s serial number here. The number is on the scanner’s back panel.

Serial Number _________________