5. Repeatedly press s or t until | USr | would not see another prompt be- | |
appears. |
|
| |
|
| cause it uses all available blocks. | |
|
|
|
|
6.Press DATA.
7.Repeatedly press s or t to select the size code for the first block, then press E. The next available block appears.
8.Repeat Step 7 until you have selected a size code for each block you want to work with.
9.Press SEARCH. The scanner exits the trunking programming mode, tunes the data channel, then begins to search using the map you programmed.
Note: If you select size code S12, S13, or S14, these restrictions apply:
•S12 can only be assigned to Blocks 0, 2, 4, or 6.
•S13 can only be assigned to Blocks 0 and 4.
•S14 can only be assigned to Block
0.
Since these size codes require multi- ple blocks, you will be prompted for the next available block when pro- gramming a fleet map. For example, if you assign Block 0 as an S12, the scanner prompts you for b2, the next block available, instead of b1. And if you assign Block 0 as an S14, you
PROGRAMMING A
HYBRID SYSTEM
A hybrid system is simply a Type I system with some of its blocks desig- nated as Type II blocks. To program a hybrid system, follow the steps listed in “Programming a Fleet Map.” How- ever, if you want a block to be Type II, select size code S0 in Step 7.
37