To lock out an ID, press L/O when the ID appears.
The ID is locked out, and the next ac- tive ID appears.
Unlocking a Single ID
1.Hold down L/O until you hear two short beeps.
2.Repeatedly press t or s to select the ID you want to unlock.
3.Press L/O.
The ID is unlocked and the next locked ID appears.
4.Press SEARCH to continue the scanner’s previous function.
Unlocking All IDs
Hold down L/O until you hear two short beeps. Then press E to unlock all the IDs at once.- The scanner beeps twice.
Note: When you unlock all the IDs, the scan list mode appears. Press SCAN to scan the IDs stored in your scan lists or press SEARCH to contin- ue the scanner’s previous function. For more information about scan lists, see “Scan Lists” on Page 31.
Using Trunk Tracking Scan Delay
Many trunked systems have a period of 2 or more seconds between a query and a reply. You can program a 5- second delay so the scanner holds on an ID for 5 seconds to wait for a reply. The scanner continues to monitor the frequency for 5 seconds after the transmission stops before resuming scanning.
Press DELAY to turn trunk tracking scan delay on or off. DELAY appears when trunk tracking scan delay is set.
Note: If you consistently miss re- sponses even with trunk tracking scan delay set, you might need to change the default system type or the fleet map you are using. See “Scanning Type I and Hybrid Trunked Systems” on Page 33.
29