Radio Shack 20-521 owner manual Direct Search

Page 27

2.Enter the frequency that is the lower limit of the range you want to search (including the decimal point), then press E.

3.Press LIMIT. Hi and 956.000 MHz appear.

4.Enter the frequency that is the upper limit of the range you want to search (including the decimal point), then press E again.

5.Press t to search from the upper to the lower limit, or s to search from the lower to the upper limit.

6. When the scanner stops on a transmission,

quickly either:

•HOLD to stop search-

ing so you can listen to the transmission. HOLD appears.

•MON/CLEAR to store

the displayed	fre-
quency into	cur-
rent monitor	.

To release hold and continue searching, press HOLD or hold down t or s for at least 1 second. Or, if you did not press HOLD, simply press t or s to continue searching.

Direct Search

Direct search lets you search up or down from the cur- rently displayed frequency.

1.Press MAN.

2.Use the number keys to enter the frequency you

want to start the search from. Press • to enter a decimal point.

27

Image 27

Contents PRO-91 150-Channel Handheld Trunking Scanner Features Page Frequency Step Transmission Range MHz KHz Scanning Legally FCC NoticeContents Special Features Trunk TrackingGeneral Guide to Scanning Page Power Sources Using Internal BatteriesPreparation Page Charging Nickel-Cadmium Batteries Using AC Power Using Vehicle Battery Power Plug the adapter’s barrel plug into your scanner’s Connecting an Optional Antenna Connecting the AntennaConnecting AN EARPHONE/ Headphones Traffic SafetyListening Safely Attaching the Belt Clip Connecting AN Extension SpeakerAbout Your Scanner Look AT the Keypad Look AT the Display Page Service Banks Understanding BanksChannel Storage Banks Monitor Memories Operation Turning on the Scanner and Setting SquelchStoring Known Frequencies Into Channels Limit Search Searching for and Temporarily Storing Active FrequenciesDirect Search Service Bank Search Search Skip Memory Moving a Frequency from a Monitor Memory to a Channel Listening to the Monitor MemoriesManually Selecting a Channel Scanning the Stored ChannelsPage Special Features DelayTurning CHANNEL-STORAGE Banks on and OFF Priority Locking OUT ChannelsPage Normal Search Hypersearch Using the KeylockUsing the Display Backlight Changing Search SpeedsTurning the KEY Tone OFF/ON Turning the Battery Save Function OFF/ONSkipping Data Signals Types of Trunking Systems Trunk TrackingSetting the Scanner to the Trunk Tracking Mode Storing Trunked Frequencies Setting Squelch for the Trunk Tracking ModePage Scanning a Trunked Bank Temporarily Storing an ID into the Monitor ID Memory Monitoring an Active IDLocking Out IDs Unlocking a Single IDUnlocking All IDs Monitoring IDs Using Trunk Tracking Scan DelayChannel Activity Bars Manually Storing IDs into Scan Lists Scan ListsDeleting a Stored ID Moving IDs to Scan ListsScanning Type I and Hybrid Trunked Systems Scanning the Scan ListsProgramming a Fleet Map Size Fleets Subfleets IDs Blocks Used E1P1 E1P2 E1P3 Size E1P4 E1P5 E1P6 Size Selecting a Preset Fleet Map Programming a Hybrid System Canadian Weather Frequencies General Guide to ScanningGuide to Frequencies National Weather FrequenciesVHF Band Guide to the Action BandsTypical Band Usage Primary UsageAbbreviations Band AllocationVery High Frequency VHF Ultra High Frequency UHF Frequency Conversion Problem Possible Remedy Cause TroubleshootingError Adjust squelch for Resetting the Scanner Care and Maintenance Specifications Power Requirement AA Alkaline Batteries 6.0 VDC Page Page RadioShack Division of Tandy Corporation Fort Worth, Texas Limited One-Year Warranty