Dynaudio SUB 250 COMPACT Switching the subwoofer on/off Power ON/OFF, Connecting loudspeakers

Page 11

Operation

Front Out/ Pre Out

LFE/SUB Out

Connecting loudspeakers

In Home Cinema systems the bass management - meaning the distribution of the low frequencies to the subwoofer and the speakers - is handled by the settings of the processor/receiver. If your equipment does not provide bass management, or if you want to use the Sub 250 together with a common stereo, the low frequency adjustment of the connected speakers can be managed by the Sub 250. This not only improves the sound by matching subwoofer and speakers, but also by freeing the power amplifier and connected speakers from the effects of sound-compromising bass reproduction. Also refer to the further explanations in the chapter “Connecting the subwoofer” on page 7.

To connect speakers:

1.Connect the subwoofer with the processor/receiver as explained in “Connecting a single subwoofer” on page 8.

2.From the Subwoofer SAT Output connect a RCA cable to the Main In of the power amplifier you use for your speakers.

Note: Stereos do not have a LFE channel. In this case just connect the front outputs of the processor/receiver (Front Out/Pre Out) with the subwoofer.

The signals connected to the SAT/SUB Input are provided at the SUB I/O - LFE/To Slave output for connecting another subwoofer. See page 8 to learn more about connecting multiple subwoofers.

Switching the subwoofer on/off (POWER ON/OFF)

Once you have ensured yourself that all necessary connections have been made, the subwoofer and the connected components can be switched on.

XSwitch the subwoofer ON with the main POWER switch on the rear panel. The status LED on the rear of the subwoofer will light up red.

Automatic mode

After switching on the Sub 250 is in Automatic mode:

•When a music signal is detected, the internal amplifier is activated automatically.

The status LED on the rear of the subwoofer will light up green.

As long as a signal is available on the subwoofer’s input, it will remain switched on.

•After 15 to 20 minutes of not sensing any input signal, the subwoofer will switch itself to Mute mode automatically.

The status LED on the rear of the subwoofer will light up red.

Note: To switch the subwoofer completely off, set the main POWER switch to the OFF position.

Dynaudio Sub 250

9

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Home Systems Professional Automotive Multimedia Dynaudio SubCare and Maintenance Adjusting the volume GainSetting the phase Phase General tips Volume GainDynaudio Sub Servicing to qualified personnel Important Safety InstructionsRisk of Electric Shock. Do Not Open About this operating manual Used signs and symbolsHow this operating manual is structured Grille Check that the contents are completeUnpacking To unpack the subwooferControls and connections SUB I/O LFE/Slave Connecting the subwooferSubwoofer inputs Damage of device due to improper connectionMultiple subwoofer connections Connecting a single subwooferTo connect speakers Switching the subwoofer on/off Power ON/OFFConnecting loudspeakers Automatic modeOver a longer period of time Adjusting the volume GainSelecting the subwoofer cut-off frequency SUB Lowpass High Sound LevelsSwitch SAT Highpass control to needed position Setting the phase PhaseSetting the satellite cut-off frequency SAT Highpass To find the correct phase settingListening Room Positioning the subwooferChoose adequate music material Impact of room-modesNext to wall, away from corner Using multiple subwoofersCorner placement Positioning possibilitiesCut-off frequencies Volume GainGeneral tips Subwoofer too high, main speakers too low Cross-over frequencies set correctlySubwoofer too low, main speakers too high Specific tips Control possibilitiesGeneral tips Just be found by experimenting Damage of Small Satellite SpeakersCheck this first TroubleshootingCare and Maintenance Recycling used products WarrantyCleaning the cabinet Changing the fuseParameter Sub Sub 250 MC Sub 250 SAT Sub 250 Compact Technical specificationsSehr geehrter Musikliebhaber Bestimmungsgemäßer Gebrauch ServiceSicherheitshinweise Zu dieser Anleitung Verwendete Zeichen und SymboleStoffabdeckung AuspackenZum Aufbau dieser Anleitung Den Subwoofer auspacken➐ ➑ SAT/SUB Input Anschluss- und BedienelementeNetzanschluss Lautstärkeregler des SubwoofersDie über einen LFE- und/oder Vorverstärker-Ausgang verfügen Den Subwoofer anschließenSubwoofer Eingänge Verbindungen und Einstellungen vorgenommen haben➋ Um den LFE-Kanal anzuschließen Einen einzelnen Subwoofer anschließenMehrere Subwoofer anschließen ➊ Um den SAT/SUB Input anzuschließenUm Lautsprecher anzuschließen Den Subwoofer ein-/ausschalten Power ON/OFFLautsprecher anschließen Automatischer ModusUm lauter und leiser zu stellen Die Lautstärke einstellen GainDie Subwoofer-Grenzfrequenz wählen SUB Lowpass Beschädigung des Gehörs durch zu hohe SchallpegelUm die Satelliten-Grenzfrequenz anzupassen Die Phase einstellen PhaseUm die richtige Phasen-Einstellung zu finden Die Satelliten-Grenzfrequenz anpassen SAT HighpassHörraum Den Subwoofer aufstellenVerwenden Sie geeignetes Musikmaterial Einfluss von Raum-ModenWandaufstellung mit Abstand zur Raumecke Möglichkeiten der AufstellungMehrere Subwoofer verwenden EckaufstellungLautstärke Gain Generelle TippsSubwoofer zu hoch, Lautsprecher zu niedrig eingestellt GrenzfrequenzenÜbergangsfrequenzen optimal eingestellt Subwoofer zu niedrig, Lautsprecher zu hoch eingestelltSchwache Verstärker und kleine Lautsprecher entlasten EinstellmöglichkeitenGenerelle Einstelltipps Spezielle EinstelltippsJedem Fall nur durch eigenes Ausprobieren finden Beschädigung der Satelliten-LautsprecherDen Lautsprecher beschädigen Prüfen Sie zuerst folgende Punkte FehlersucheBeschädigung der Lautsprechermembran Pflege und WartungDen Subwoofer reinigen Die Sicherung ersetzenDas Produkt entsorgen GarantieTechnische Daten Technische Informationen/Garantie Dynaudio Sub

SUB 250 COMPACT, SUB 250 MC, SUB 250 SAT specifications

Dynaudio is renowned for its exceptional audio equipment, and their SUB 250 series exemplifies this commitment to quality with three impressive models: the SUB 250 MC, SUB 250 SAT, and SUB 250 COMPACT. Each subwoofer is crafted to deliver unparalleled sound performance, making them ideal additions to home theater systems or professional audio setups.

The Dynaudio SUB 250 MC is designed for versatility and power. It features a robust 10-inch driver that delivers deep, accurate bass, enhancing the overall sound experience whether you're watching movies or listening to music. With a built-in amplifier that provides substantial power, the SUB 250 MC ensures that bass frequencies are rich and dynamic. Its advanced DSP control allows users to fine-tune their listening experience, adjusting settings to accommodate room acoustics and personal preferences.

Next in the lineup, the SUB 250 SAT offers impressive performance in a more compact format. It’s engineered for satellite speakers, providing powerful low-frequency support while maintaining a small footprint that is perfect for tight spaces. The SAT model integrates seamlessly with other Dynaudio speakers, ensuring a cohesive soundstage. The easy-to-use connectivity options make it a suitable choice for both casual listeners and audiophiles alike, making it a staple in modern audio setups.

Lastly, the SUB 250 COMPACT is tailored for those who demand high-performance bass without sacrificing space. Despite its smaller size, this model packs a punch, delivering deep bass that belies its compact design. Ideal for smaller rooms or minimalist aesthetics, the SUB 250 COMPACT can easily integrate into any home or studio environment. Like its counterparts, it features advanced control technologies to optimize sound performance, ensuring that even in limited spaces, users experience a full-bodied audio performance.

All three models benefit from Dynaudio’s expertise in sound technology, featuring high-quality materials and innovative engineering. Built with durability in mind, these subwoofers are not only powerful but also designed to last, providing listeners with dependable performance for years to come. Whether you’re adding to a home theater setup or looking for professional audio equipment, the Dynaudio SUB 250 series stands out as an excellent choice for achieving superior sound quality.
Top Page Image Contents