Dynaudio SUB 250 SAT Connecting the subwoofer, Subwoofer inputs, SUB I/O LFE/Slave, SAT/SUB Input

Page 9

Operation

 

Connecting the subwoofer

 

 

NOTICE

Damage of device due to improper connection

 

X Set the mains power switch to OFF before connecting the Sub 250.

 

X Only switch the subwoofer on (mains power switch to ON) after all connections and

 

set up steps have been properly completed.

 

 

 

Note: The Dynaudio Sub 250 can be controlled by any source provided with a LFE

 

or preamplifier output. In the operating manual the expression “processor/

 

receiver” will be used for all these sources.

SUB I/O

 

LFE/Slave In

SAT/SUB Input

Subwoofer inputs

The Dynaudio Sub 250 provides two different signal inputs:

LFE

MODE

Slave

+

SUBSAT

Lowpass Highpass

+

GAIN

PHASE

+

SUB I/O - LFE/Slave In

This input allows the LFE (Low Frequency Effect) channel to be connected, which is used in Home Cinema systems to reproduce low frequency effects.

The signal is:

•reproduced by the subwoofer

•routed to the SUB I/O - LFE/To Slave output for a second subwoofer to be connected.

The SUB Lowpass control has no impact on this input.

SAT/SUB Input

This input allows the connection of the full bandwidth signal from the processor/ receiver (preamplifier out).

The signal is:

•reproduced by the subwoofer,

•routed to the SAT Output terminals. Low frequencies are cut-off according to the SAT Highpass setting,

•routed to the SUB I/O - LFE/To Slave output for a second subwoofer to be connected. High frequencies are cut-off according to the SUB Lowpass setting.

See figure left for correlations between input, output and settings.

SUB I/O

SAT Output

To Slave

 

Subwoofer

Note: All Sub 250 inputs and outputs are low level terminals. Thus, neither a power amplifier output must be connected to the subwoofer nor passive loudspeakers can be driven by the subwoofer directly!

Dynaudio Sub 250

7

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Home Systems Professional Automotive Multimedia Dynaudio SubSetting the phase Phase Adjusting the volume GainGeneral tips Volume Gain Care and MaintenanceDynaudio Sub Important Safety Instructions Risk of Electric Shock. Do Not OpenServicing to qualified personnel About this operating manual Used signs and symbolsHow this operating manual is structured Unpacking Check that the contents are completeTo unpack the subwoofer GrilleControls and connections Subwoofer inputs Connecting the subwooferDamage of device due to improper connection SUB I/O LFE/SlaveMultiple subwoofer connections Connecting a single subwooferConnecting loudspeakers Switching the subwoofer on/off Power ON/OFFAutomatic mode To connect speakersSelecting the subwoofer cut-off frequency SUB Lowpass Adjusting the volume GainHigh Sound Levels Over a longer period of timeSetting the satellite cut-off frequency SAT Highpass Setting the phase PhaseTo find the correct phase setting Switch SAT Highpass control to needed positionChoose adequate music material Positioning the subwooferImpact of room-modes Listening RoomCorner placement Using multiple subwoofersPositioning possibilities Next to wall, away from cornerVolume Gain General tipsCut-off frequencies Cross-over frequencies set correctly Subwoofer too low, main speakers too highSubwoofer too high, main speakers too low Control possibilities General tipsSpecific tips Just be found by experimenting Damage of Small Satellite SpeakersTroubleshooting Care and MaintenanceCheck this first Cleaning the cabinet WarrantyChanging the fuse Recycling used productsParameter Sub Sub 250 MC Sub 250 SAT Sub 250 Compact Technical specificationsSehr geehrter Musikliebhaber Service SicherheitshinweiseBestimmungsgemäßer Gebrauch Zu dieser Anleitung Verwendete Zeichen und SymboleZum Aufbau dieser Anleitung AuspackenDen Subwoofer auspacken StoffabdeckungNetzanschluss Anschluss- und BedienelementeLautstärkeregler des Subwoofers ➐ ➑ SAT/SUB InputSubwoofer Eingänge Den Subwoofer anschließenVerbindungen und Einstellungen vorgenommen haben Die über einen LFE- und/oder Vorverstärker-Ausgang verfügenMehrere Subwoofer anschließen Einen einzelnen Subwoofer anschließen➊ Um den SAT/SUB Input anzuschließen ➋ Um den LFE-Kanal anzuschließenLautsprecher anschließen Den Subwoofer ein-/ausschalten Power ON/OFFAutomatischer Modus Um Lautsprecher anzuschließenDie Subwoofer-Grenzfrequenz wählen SUB Lowpass Die Lautstärke einstellen GainBeschädigung des Gehörs durch zu hohe Schallpegel Um lauter und leiser zu stellenUm die richtige Phasen-Einstellung zu finden Die Phase einstellen PhaseDie Satelliten-Grenzfrequenz anpassen SAT Highpass Um die Satelliten-Grenzfrequenz anzupassenVerwenden Sie geeignetes Musikmaterial Den Subwoofer aufstellenEinfluss von Raum-Moden HörraumMehrere Subwoofer verwenden Möglichkeiten der AufstellungEckaufstellung Wandaufstellung mit Abstand zur RaumeckeLautstärke Gain Generelle TippsÜbergangsfrequenzen optimal eingestellt GrenzfrequenzenSubwoofer zu niedrig, Lautsprecher zu hoch eingestellt Subwoofer zu hoch, Lautsprecher zu niedrig eingestelltGenerelle Einstelltipps EinstellmöglichkeitenSpezielle Einstelltipps Schwache Verstärker und kleine Lautsprecher entlastenBeschädigung der Satelliten-Lautsprecher Den Lautsprecher beschädigenJedem Fall nur durch eigenes Ausprobieren finden Prüfen Sie zuerst folgende Punkte FehlersucheDen Subwoofer reinigen Pflege und WartungDie Sicherung ersetzen Beschädigung der LautsprechermembranDas Produkt entsorgen GarantieTechnische Daten Technische Informationen/Garantie Dynaudio Sub

SUB 250 COMPACT, SUB 250 MC, SUB 250 SAT specifications

Dynaudio is renowned for its exceptional audio equipment, and their SUB 250 series exemplifies this commitment to quality with three impressive models: the SUB 250 MC, SUB 250 SAT, and SUB 250 COMPACT. Each subwoofer is crafted to deliver unparalleled sound performance, making them ideal additions to home theater systems or professional audio setups.

The Dynaudio SUB 250 MC is designed for versatility and power. It features a robust 10-inch driver that delivers deep, accurate bass, enhancing the overall sound experience whether you're watching movies or listening to music. With a built-in amplifier that provides substantial power, the SUB 250 MC ensures that bass frequencies are rich and dynamic. Its advanced DSP control allows users to fine-tune their listening experience, adjusting settings to accommodate room acoustics and personal preferences.

Next in the lineup, the SUB 250 SAT offers impressive performance in a more compact format. It’s engineered for satellite speakers, providing powerful low-frequency support while maintaining a small footprint that is perfect for tight spaces. The SAT model integrates seamlessly with other Dynaudio speakers, ensuring a cohesive soundstage. The easy-to-use connectivity options make it a suitable choice for both casual listeners and audiophiles alike, making it a staple in modern audio setups.

Lastly, the SUB 250 COMPACT is tailored for those who demand high-performance bass without sacrificing space. Despite its smaller size, this model packs a punch, delivering deep bass that belies its compact design. Ideal for smaller rooms or minimalist aesthetics, the SUB 250 COMPACT can easily integrate into any home or studio environment. Like its counterparts, it features advanced control technologies to optimize sound performance, ensuring that even in limited spaces, users experience a full-bodied audio performance.

All three models benefit from Dynaudio’s expertise in sound technology, featuring high-quality materials and innovative engineering. Built with durability in mind, these subwoofers are not only powerful but also designed to last, providing listeners with dependable performance for years to come. Whether you’re adding to a home theater setup or looking for professional audio equipment, the Dynaudio SUB 250 series stands out as an excellent choice for achieving superior sound quality.
Top Page Image Contents