Dynaudio SUB 250 MC, SUB 250 SAT, SUB 250 COMPACT Unpacking, To unpack the subwoofer, Grille

Page 7

 

 

Before operation

 

Unpacking

 

To find the suitable position for the Sub 250 in your listening room, please read the

 

chapter “Positioning the subwoofer” on page 12.

 

To unpack the subwoofer

1

1.

Unpack the subwoofer on a clean, even and soft area; floor carpeting is very

 

suitable.

 

2.

The packaging should be opened from the top. Remove all accessories that

 

 

come packed with the subwoofer (such as AC power cord and grille). Do not

 

 

remove the top part of the protective material.

 

3.

With the protective material still in place but with accessories removed, carefully

 

 

tilt the packaging on its side and tilt again to turn it upside-down. Ensure that no

 

 

part of the top-cover is obstructing the opening at the top.

2

4.

The outer packaging can now be lifted away from the subwoofer itself. Remove

 

 

the protective material that now is on top. Through the polyethylene bag you can

 

 

now see the underside of the subwoofer.

 

5.

Open the plastic bag and remove such from around the base of the subwoofer.

 

6.

Again, carefully tilt the subwoofer on its side and again to turn it onto its feet. Note

 

 

that the top part of the protective material will now come off easily so ensure that

 

 

the subwoofer does not drop or slide away in the process.

3

Check that the contents are complete

 

•

Subwoofer: The factory-set power requirements (refer to label on rear of

 

 

subwoofer) should correspond for the region where the subwoofer was

 

 

purchased. Refer also to chapter “Important Safety Instructions” on page 2.

 

•

Front baffle grille.

 

•

AC mains lead. The supplied lead should be suitable for the region where the

 

 

subwoofer was purchased.

 

•

Owners Manual.

Grille

The subwoofer can be operated without the grille. However, it is recommended that the grille is mounted during normal use to help prevent accidental damage or dirt settling on the cone of the loudspeaker. With subwoofers, the influence of the grille on the sound is virtually negligible.

To remove the grille:

XGently pull the grille at all corners.

To fit the grille:

XLine up the studs with the corresponding front baffle holes.

XGently push the grille in at all corners.

Note: Be careful when mounting the grille not to touch the cone of the loudspeaker itself.

Dynaudio Sub 250

5

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Home Systems Professional Automotive Multimedia Dynaudio SubCare and Maintenance Adjusting the volume GainSetting the phase Phase General tips Volume GainDynaudio Sub Risk of Electric Shock. Do Not Open Important Safety InstructionsServicing to qualified personnel About this operating manual Used signs and symbolsHow this operating manual is structured Grille Check that the contents are completeUnpacking To unpack the subwooferControls and connections SUB I/O LFE/Slave Connecting the subwooferSubwoofer inputs Damage of device due to improper connectionMultiple subwoofer connections Connecting a single subwooferTo connect speakers Switching the subwoofer on/off Power ON/OFFConnecting loudspeakers Automatic modeOver a longer period of time Adjusting the volume GainSelecting the subwoofer cut-off frequency SUB Lowpass High Sound LevelsSwitch SAT Highpass control to needed position Setting the phase PhaseSetting the satellite cut-off frequency SAT Highpass To find the correct phase settingListening Room Positioning the subwooferChoose adequate music material Impact of room-modesNext to wall, away from corner Using multiple subwoofersCorner placement Positioning possibilitiesGeneral tips Volume GainCut-off frequencies Subwoofer too low, main speakers too high Cross-over frequencies set correctlySubwoofer too high, main speakers too low General tips Control possibilitiesSpecific tips Just be found by experimenting Damage of Small Satellite SpeakersCare and Maintenance TroubleshootingCheck this first Recycling used products WarrantyCleaning the cabinet Changing the fuseParameter Sub Sub 250 MC Sub 250 SAT Sub 250 Compact Technical specificationsSehr geehrter Musikliebhaber Sicherheitshinweise ServiceBestimmungsgemäßer Gebrauch Zu dieser Anleitung Verwendete Zeichen und SymboleStoffabdeckung AuspackenZum Aufbau dieser Anleitung Den Subwoofer auspacken➐ ➑ SAT/SUB Input Anschluss- und BedienelementeNetzanschluss Lautstärkeregler des SubwoofersDie über einen LFE- und/oder Vorverstärker-Ausgang verfügen Den Subwoofer anschließenSubwoofer Eingänge Verbindungen und Einstellungen vorgenommen haben➋ Um den LFE-Kanal anzuschließen Einen einzelnen Subwoofer anschließenMehrere Subwoofer anschließen ➊ Um den SAT/SUB Input anzuschließenUm Lautsprecher anzuschließen Den Subwoofer ein-/ausschalten Power ON/OFFLautsprecher anschließen Automatischer ModusUm lauter und leiser zu stellen Die Lautstärke einstellen GainDie Subwoofer-Grenzfrequenz wählen SUB Lowpass Beschädigung des Gehörs durch zu hohe SchallpegelUm die Satelliten-Grenzfrequenz anzupassen Die Phase einstellen PhaseUm die richtige Phasen-Einstellung zu finden Die Satelliten-Grenzfrequenz anpassen SAT HighpassHörraum Den Subwoofer aufstellenVerwenden Sie geeignetes Musikmaterial Einfluss von Raum-ModenWandaufstellung mit Abstand zur Raumecke Möglichkeiten der AufstellungMehrere Subwoofer verwenden EckaufstellungLautstärke Gain Generelle TippsSubwoofer zu hoch, Lautsprecher zu niedrig eingestellt GrenzfrequenzenÜbergangsfrequenzen optimal eingestellt Subwoofer zu niedrig, Lautsprecher zu hoch eingestelltSchwache Verstärker und kleine Lautsprecher entlasten EinstellmöglichkeitenGenerelle Einstelltipps Spezielle EinstelltippsDen Lautsprecher beschädigen Beschädigung der Satelliten-LautsprecherJedem Fall nur durch eigenes Ausprobieren finden Prüfen Sie zuerst folgende Punkte FehlersucheBeschädigung der Lautsprechermembran Pflege und WartungDen Subwoofer reinigen Die Sicherung ersetzenDas Produkt entsorgen GarantieTechnische Daten Technische Informationen/Garantie Dynaudio Sub

SUB 250 COMPACT, SUB 250 MC, SUB 250 SAT specifications

Dynaudio is renowned for its exceptional audio equipment, and their SUB 250 series exemplifies this commitment to quality with three impressive models: the SUB 250 MC, SUB 250 SAT, and SUB 250 COMPACT. Each subwoofer is crafted to deliver unparalleled sound performance, making them ideal additions to home theater systems or professional audio setups.

The Dynaudio SUB 250 MC is designed for versatility and power. It features a robust 10-inch driver that delivers deep, accurate bass, enhancing the overall sound experience whether you're watching movies or listening to music. With a built-in amplifier that provides substantial power, the SUB 250 MC ensures that bass frequencies are rich and dynamic. Its advanced DSP control allows users to fine-tune their listening experience, adjusting settings to accommodate room acoustics and personal preferences.

Next in the lineup, the SUB 250 SAT offers impressive performance in a more compact format. It’s engineered for satellite speakers, providing powerful low-frequency support while maintaining a small footprint that is perfect for tight spaces. The SAT model integrates seamlessly with other Dynaudio speakers, ensuring a cohesive soundstage. The easy-to-use connectivity options make it a suitable choice for both casual listeners and audiophiles alike, making it a staple in modern audio setups.

Lastly, the SUB 250 COMPACT is tailored for those who demand high-performance bass without sacrificing space. Despite its smaller size, this model packs a punch, delivering deep bass that belies its compact design. Ideal for smaller rooms or minimalist aesthetics, the SUB 250 COMPACT can easily integrate into any home or studio environment. Like its counterparts, it features advanced control technologies to optimize sound performance, ensuring that even in limited spaces, users experience a full-bodied audio performance.

All three models benefit from Dynaudio’s expertise in sound technology, featuring high-quality materials and innovative engineering. Built with durability in mind, these subwoofers are not only powerful but also designed to last, providing listeners with dependable performance for years to come. Whether you’re adding to a home theater setup or looking for professional audio equipment, the Dynaudio SUB 250 series stands out as an excellent choice for achieving superior sound quality.
Top Page Image Contents