Dynaudio SUB 250 COMPACT, SUB 250 SAT, SUB 250 MC owner manual Controls and connections

Page 8

Before operation

➊

➋

Controls and connections

➊POWER ON/OFF

Main power switch (to switch the subwoofer manually on and off). LED: shows operation mode:

•red = subwoofer switched on and in mute mode

•green = subwoofer is activated

➋AC IN

Main power input.

➌GAIN

Subwoofer volume level.

➍SUB Lowpass

Subwoofer lowpass frequency: continuously variable from 50 to 150 Hz.

➎ PHASE

Phase setting: phase can be set to 0° or 180°.

➏MODE

Subwoofer operation mode LFE or Slave.

➌• LFE: setting if just one subwoofer is used or for first subwoofer if system consists of multiple subwoofers. Note that the SUB Lowpass control does not have an effect when the LFE Mode is selected.

• Slave: setting for second and all following subwoofers. Note that the SUB

➍

Lowpass, PHASE and GAIN controls do not have an effect when the Slave

Mode is selected.

 

 

➐ SUB I/O

➎

• LFE/Slave in: input for LFE signal from processor/receiver. Note that the

signal must be a true LFE signal or already have been filtered by the

 

 

processor/receiver, as SUB Lowpass does not have an effect in combination

➏with the LFE input.

•LFE/to Slave: output to next subwoofer if installed.

➑SAT/SUB Input

➐Input for full bandwidth signal from processor/receiver. This signal will be processed according to the SAT Highpass setting and provided at the SAT Output connection for satellite speakers to be connected.

➑➒ SAT Output

Output for satellite speakers to be connected. This signal is processed according

➒to the SAT Highpass setting.

➓SAT Highpass

Allows cutting off low frequencies of the signal provided at the SAT Output.

•Flat: signal is not processed

➓• 60: cut-off frequency at 60 Hz

•80: cut-off frequency at 80 Hz

6

Dynaudio Sub 250

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Dynaudio Sub Home Systems Professional Automotive MultimediaAdjusting the volume Gain Setting the phase PhaseGeneral tips Volume Gain Care and MaintenanceDynaudio Sub Servicing to qualified personnel Important Safety InstructionsRisk of Electric Shock. Do Not Open Used signs and symbols About this operating manualHow this operating manual is structured Check that the contents are complete UnpackingTo unpack the subwoofer GrilleControls and connections Connecting the subwoofer Subwoofer inputsDamage of device due to improper connection SUB I/O LFE/SlaveConnecting a single subwoofer Multiple subwoofer connectionsSwitching the subwoofer on/off Power ON/OFF Connecting loudspeakersAutomatic mode To connect speakersAdjusting the volume Gain Selecting the subwoofer cut-off frequency SUB LowpassHigh Sound Levels Over a longer period of timeSetting the phase Phase Setting the satellite cut-off frequency SAT HighpassTo find the correct phase setting Switch SAT Highpass control to needed positionPositioning the subwoofer Choose adequate music materialImpact of room-modes Listening RoomUsing multiple subwoofers Corner placementPositioning possibilities Next to wall, away from cornerCut-off frequencies Volume GainGeneral tips Subwoofer too high, main speakers too low Cross-over frequencies set correctlySubwoofer too low, main speakers too high Specific tips Control possibilitiesGeneral tips Damage of Small Satellite Speakers Just be found by experimentingCheck this first TroubleshootingCare and Maintenance Warranty Cleaning the cabinetChanging the fuse Recycling used productsTechnical specifications Parameter Sub Sub 250 MC Sub 250 SAT Sub 250 CompactSehr geehrter Musikliebhaber Bestimmungsgemäßer Gebrauch ServiceSicherheitshinweise Verwendete Zeichen und Symbole Zu dieser AnleitungAuspacken Zum Aufbau dieser AnleitungDen Subwoofer auspacken StoffabdeckungAnschluss- und Bedienelemente NetzanschlussLautstärkeregler des Subwoofers ➐ ➑ SAT/SUB InputDen Subwoofer anschließen Subwoofer EingängeVerbindungen und Einstellungen vorgenommen haben Die über einen LFE- und/oder Vorverstärker-Ausgang verfügenEinen einzelnen Subwoofer anschließen Mehrere Subwoofer anschließen➊ Um den SAT/SUB Input anzuschließen ➋ Um den LFE-Kanal anzuschließenDen Subwoofer ein-/ausschalten Power ON/OFF Lautsprecher anschließenAutomatischer Modus Um Lautsprecher anzuschließenDie Lautstärke einstellen Gain Die Subwoofer-Grenzfrequenz wählen SUB LowpassBeschädigung des Gehörs durch zu hohe Schallpegel Um lauter und leiser zu stellenDie Phase einstellen Phase Um die richtige Phasen-Einstellung zu findenDie Satelliten-Grenzfrequenz anpassen SAT Highpass Um die Satelliten-Grenzfrequenz anzupassenDen Subwoofer aufstellen Verwenden Sie geeignetes MusikmaterialEinfluss von Raum-Moden HörraumMöglichkeiten der Aufstellung Mehrere Subwoofer verwendenEckaufstellung Wandaufstellung mit Abstand zur RaumeckeGenerelle Tipps Lautstärke GainGrenzfrequenzen Übergangsfrequenzen optimal eingestelltSubwoofer zu niedrig, Lautsprecher zu hoch eingestellt Subwoofer zu hoch, Lautsprecher zu niedrig eingestelltEinstellmöglichkeiten Generelle EinstelltippsSpezielle Einstelltipps Schwache Verstärker und kleine Lautsprecher entlastenJedem Fall nur durch eigenes Ausprobieren finden Beschädigung der Satelliten-LautsprecherDen Lautsprecher beschädigen Fehlersuche Prüfen Sie zuerst folgende PunktePflege und Wartung Den Subwoofer reinigenDie Sicherung ersetzen Beschädigung der LautsprechermembranGarantie Das Produkt entsorgenTechnische Daten Technische Informationen/Garantie Dynaudio Sub

SUB 250 COMPACT, SUB 250 MC, SUB 250 SAT specifications

Dynaudio is renowned for its exceptional audio equipment, and their SUB 250 series exemplifies this commitment to quality with three impressive models: the SUB 250 MC, SUB 250 SAT, and SUB 250 COMPACT. Each subwoofer is crafted to deliver unparalleled sound performance, making them ideal additions to home theater systems or professional audio setups.

The Dynaudio SUB 250 MC is designed for versatility and power. It features a robust 10-inch driver that delivers deep, accurate bass, enhancing the overall sound experience whether you're watching movies or listening to music. With a built-in amplifier that provides substantial power, the SUB 250 MC ensures that bass frequencies are rich and dynamic. Its advanced DSP control allows users to fine-tune their listening experience, adjusting settings to accommodate room acoustics and personal preferences.

Next in the lineup, the SUB 250 SAT offers impressive performance in a more compact format. It’s engineered for satellite speakers, providing powerful low-frequency support while maintaining a small footprint that is perfect for tight spaces. The SAT model integrates seamlessly with other Dynaudio speakers, ensuring a cohesive soundstage. The easy-to-use connectivity options make it a suitable choice for both casual listeners and audiophiles alike, making it a staple in modern audio setups.

Lastly, the SUB 250 COMPACT is tailored for those who demand high-performance bass without sacrificing space. Despite its smaller size, this model packs a punch, delivering deep bass that belies its compact design. Ideal for smaller rooms or minimalist aesthetics, the SUB 250 COMPACT can easily integrate into any home or studio environment. Like its counterparts, it features advanced control technologies to optimize sound performance, ensuring that even in limited spaces, users experience a full-bodied audio performance.

All three models benefit from Dynaudio’s expertise in sound technology, featuring high-quality materials and innovative engineering. Built with durability in mind, these subwoofers are not only powerful but also designed to last, providing listeners with dependable performance for years to come. Whether you’re adding to a home theater setup or looking for professional audio equipment, the Dynaudio SUB 250 series stands out as an excellent choice for achieving superior sound quality.
Top Page Image Contents