EAW SB730, KF730 owner manual Table of Contents

Page 3

	TABLE OF CONTENTS
1.	READ THIS FIRST	4
1.1	EC Statement Of Conformity	4
1.2	Safety Precautions	4
1.3	General Precautions	4
2.	INTRODUCTION	5
2.1	KF730 and SB730	5
2.2	KF730P and SB730P	5
3.	UNPACKING	5
3.1	Contents	5
3.2	Shipping Damage	5
3.3	Returning Products To EAW	5
4.	KF730 ARRAY DESIGN	6
4.1	KF730 Wizard	6
4.2	Fill Coverage	6
4.3	Ground Stacking	7
4.4	Subwoofers	7
5.	ARRAY OPERATION	9
5.1	Overview	9
5.2	Engineering Design	9
5.3	System Block Diagram	9
5.4	Signal Processing	9
5.5	Amplifier Gain Settings	10
5.6	User Adjustments	10
5.7	Amplifier Power Requirements	10
5.8	Input Connections	12
6.	RIGGING	15
6.1	Rigging Warnings	15
6.2	Suspension Load Rating - Working Load Limit (WLL)	15
6.3	Fly-Bar Rigging Recommendations	16
6.4	Attaching Enclosures To The Fly-Bar	16
6.5	Pallets	19
6.6	Initial Rigging Preparation	19
6.7	Suspension Procedures	20
6.8	Ground Stacking Procedures	22
7.	CONTACTING EAW	25
7.1	Operating Questions	25
7.2	Service Information	25
7.3	Literature and Specifications	25
7.4	General	25
8.	SERVICE AND MAINTENANCE	26
8.1	General Service	26
8.2	Rigging Service	26
8.3	Basic Field Troubleshooting	26
8.4	Inspection	26
8.5	Maintenance	27

Page 3 of 28 RD0169 (A) KF730 & SB730 OWNER’S MANUAL

Image 3

Contents EAW Part RD0169 KF730 & SB730 LoudspeakerPage Table of Contents EC Statement of Conformity Safety PrecautionsGeneral Precautions Read this FirstShipping Damage ContentsIntroduction UnpackingFill Coverage KF730 Array DesignSubwoofers Ground StackingOther Subwoofers Signal Delay on SubwoofersOverview System Block DiagramSignal Processing Array OperationAmplifier Gain Settings User AdjustmentsAmplifier Power Requirements KF730 Qty Selecting an Appropriate Amplifier Size1 KF730 Input Connections Input ConnectionsSelecting an Appropriate Amplifier Size Rule Of Thumb Operating Limits3 SB730 System Input Connections 2 SB730 Connections5 SB730P Input Connections Wire Gauge4 KF730P Input Connections + -- +Rigging Rigging WarningsSuspension Load Rating Working Load Limit WLL Attaching Enclosures to the FLY-BAR FLY-BAR Rigging RecommendationsHinge and Hinge Tube Holes Quick Release PinsKF730 and SB730 Hinge and Hinge Tube Holes Locking PinsInitial Rigging Preparation PalletsAttaching a KF730 or SB730 to the Fly-Bar Suspension Procedures1 KF730s On KF730 Pallet 2 SB730s on SB730 PalletAttaching SB730s to SB730s Already Suspended Attaching a KF730 to an SB730 Already SuspendedAttaching KF730s to KF730s Already Suspended Ground Stacking Procedures Setting the Tilt Angle for the Entire ArrayStacking With SB730s as the Base Stacking Additional Enclosures SB730 as the base Stacking With the Fly-Bar as the BaseStacking the First Enclosure Fly-Bar as the base Stacking Additional Enclosures Fly-Bar as the base Operating Questions Service InformationLiterature and Specifications Contacting EAWBasic Field Troubleshooting Service and MaintenanceGeneral Service Rigging ServiceMaintenance Eastern Acoustic Works ONE Main Street WHITINSVILLE, MA