42 | 4 Upgrading your computer |
Opening your Veriton 6800/7800
Caution! Before you proceed, make sure that you have turned off your computer and all peripherals connected to it. Read the "Preinstallation instructions" on page 39.
You need to open your computer before you can install additional components. See the following section for instructions:
To remove the side panel
1Turn off your computer and unplug all cables.
2Place your computer on a flat, steady surface.
3Turn the screws counterclockwise with your fingers to release the cover.
4Hold right panel (from rear view) with both hands. Slide it back about an inch and then gently pull it outward to detach it.
Veriton 6800