Acer 49.49C02.001 manual System Information, Parameter Description Format

If you would like to keep the changes you made, use the cursor left/right (→←) keys to select Yes; then press Enter. Choose No if you want to discard the changes you made.

System Information

The System Information sub-menu displays basic and important information about your computer.

	System Information
CPU Type & Speed	Pentium III, 450 MHz
	(Coppermine)
Floppy Disk Drive	1.44 MB 3.5-inch
System with	CD-ROM/DVD-ROM Attached
Hard Disk Drive	xxxx MB
HDD Serial Number	xxxxxxxxxx
System BIOS Version	V3.0 R01-A1h
VGA BIOS Version	ATI MACH64 SDRAM BIOS 4.222T
	(A730)
Serial Number	xxxxxxxxxxxxxxxxxxxxxx
Asset Tag Number	xxxxxxxxxxxxxxxxxxxxxx
Product Name	xxxxxxxxxxxxxxxxxxxxxx
Manufacturer Name	xxxxxxxxxxxxxxxx
UUID	xxxxxxxx-xxxx-xxxx-xxxx-xxxxx

−↓ = Move highlight bar, →← = Change Setting, F1 = Help

NOTE: The screen above is a sample and may not reflect the actual data on your computer. The following table describes the information in this sub-menu.

NOTE: “x” may refer to a series of numbers and/or characters or a combination of both.

Parameter	Description	Format
CPU Type & Speed	Shows the type and speed in Megahertz (MHz) of
	the Central Processing Unit (CPU)
Floppy Disk Drive	Shows the floppy disk drive type
System with	Shows the EasyLink Combo Drive type, CD-ROM
	or DVD-ROM.
Hard Disk Drive	Shows the size or capacity of the hard disk
HDD Serial Number	Shows the serial number of the hard disk
System BIOS Version	Shows the version number of the BIOS.	Vx Rx (version and release
		numbers)
VGA BIOS Version	Shows the version number of the VGA display	Vx Rx (version and release
	BIOS.	numbers)
Serial Number	Shows the serial number of the system. It is the
	number identical to the system’s serial number
	labelled at the bottom of the system unit. The
	default serial number is scanned while
	manufacturing, and stored to the LCD inverter.
Asset Tag Number	Shows the asset tag number of the computer.
	The default setting is empty. Customers can input
	it from the Notebook Manager. It will be stored in
	LCD inverter.

24 Chapter 2