Escort 9500CI specifications Congratulations

Congratulations

Your new GPS-powered PASSPORT 9500ci is the most advanced custom-installed radar and laser defense system ever designed.

If you’ve used a radar detector before, a review of the Quick Reference Guide on pages 4 and 5, and the Preferences on pages 12 and 13 will briefly explain the

Quick Reference Card

The 9500ci includes full X, K, SuperWide Ka, and Safety Warning System radar capability, front and rear laser detection with optional Laser Shifting, digital signal processing (DSP) for superior range, our patented Mute and AutoMute and all the performance that only ESCORT can deliver.

In addition, the ESCORT 9500ci contains the following revolutionary features:

•Exclusive AutoLearn and Auto

Unlearn automatically identifies each signal and determines if it’s a real threat or not

•Exclusive True-Lock permanently locks out false alarms by exact location and frequency

•Twin-antenna design with dual LNA (low noise amplifier) receivers provide the best long-range performance against all North American radar bands

•Exclusive TotalShield™ Technology makes the 9500ci totally undetectable by any radar detector detector (RDD)

•Pre-loaded safety camera locations, including red light and fixed speed camera locations

•Easy-to-use Preferences lets you customize up to 10 features

new features.

If this is your first detector, please read the manual in detail to get the most out of your PASSPORT 9500ci’s outstanding performance and innovative features.

Please drive safely.

FCC Note: Modifications not expressly approved by the manufacturer could void the user’s FCC granted authority to operate the equipment.

 Remove card along perforations 

1

 Remove card along perforations 

PASSPORT 9500ci Quick Reference Card

There are 10 user-selectable options so	An example:
you can customize your 9500ci for your	Here is how you would turn 9500ci’s
own preferences.	AutoMute feature off:
The buttons labeled VOL and BRT are	1 Enter Preferences by holding both the
also used to enter Preferences, REVIEW
	VOL and BRT buttons down for 2 seconds.
your current settings, and to CHANGE any
	The 9500ci will display Prefs,
settings. The abbreviations PGM, RVW,	accompanied by a voice announcement.
and CHG are located on the lower part of
	2 Then hold the VOL button down. The
the controller.
	9500ci will scroll through the categories,
How to use EZ-Preferences
	starting with Pilot ( Pilot), GPS ( GPS),
1 To enter Preferences, press and	AutoLearn (aLearn), SpeedAlert
hold both VOL and BRT buttons down	(sAlert), Meter ( Meter), then AutoMute
for 2 seconds. A voice announces	(aMute).
“preferences,” and will display the word	3 Release the VOL button when the
Pref.
	9500ci shows the AutoMute item.
2 Then press the VOL button to	Since the factory setting is for AutoMute to
review the current settings. You can	be on, 9500ci will display aMute ON,
either tap the button to change from	accompanied by a voice announcement.
setting to setting, or hold the button to	(If you accidentally don’t release the
scroll through all the options.	button in time, and the 9500ci goes to the
3 Press the BRT button to change any	next category, hold the VOL button down
	again, and scroll through the categories
setting. You can either tap the button to
	again until aMute is displayed.)
change from setting to setting, or hold the
button down to scroll through all the	4 Press the BRT button to change from
options.	aMute ON to aMute OFF.
4 To leave Preferences, simply wait 8	5 To complete this change, simply wait 8
seconds without pressing any button,	seconds without pressing any button, or
or momentarily press the PWR button.	press the PWR button. The 9500ci will
The unit will display Complete,	display Complete, accompanied by a
accompanied by a voice announcement.	voice announcement and return to its
Factory Default Settings	normal operation.
To reset the 9500ci to its original factory
settings, press and hold the VOL and
SENS buttons while turning the power
on. The 9500ci’s display will provide a
Reset accompanied by an audible
alert, acknowledging the reset.	Preferences Details 