Details of Preferences
Pilot (Power-on indication)
Pilot HWY (Full word)
In this setting, the 9500ci will display “Highway,” “Auto,” or “AutoNox” as its
Pilot H (Letter)
In this setting, the 9500ci will display “H” for Highway, “A” for Auto, and “Anx” for Auto No X.
Pilot H.> (Letter with scrolling dot) In this setting, the 9500ci will display “H” for Highway, “A” for Auto, and “Anx” for Auto No X, accompanied by a scrolling dot.
Pilot V (Vehicle voltage)
In this setting, the 9500ci will display “H” for Highway, “A” for Auto, and “Anx” for Auto NoX, accompanied by the vehicle’s voltage.
NOTE: A high or low voltage warning is given any time the vehicle’s voltage drops below 10.5 volts, or goes above 16.5 volts. This feature is always on, regardless of the Pilot setting.
Pilot SPD (Vehicle speed)
In this setting, the 9500ci will display “H” for Highway, “A” for Auto, and “Anx” for Auto NoX, accompanied by the vehicle’s speed.
NOTE: When you are using the Dark mode, the display will not display anything. Only the
GPS
GPS On (GPS receiver on)
In this setting, all GPS related features are on. (factory default)
GPS Off (GPS receiver off)
In this setting, all GPS features are off.
Auto Learn
aLrn On (AutoLearn is on)
In this setting, the 9500ci will constantly analyze all incoming radar signals and lock out false alarms automatically over time. (factory default)
aLrn Off (AutoLearn is off)
In this setting, any false alerts will need to be locked out manually using the Mute button.
Speed Alert
sAlrt On (Speed Alert is on)
In this setting, your current vehicle speed is displayed, then the meter you’ve selected. (factory default)
sAlrt On (Speed Alert is off) In this setting, speed alert is off.
Signal Strength Meter
MeterSTD (Standard meter)
In this setting, the meter displays the band of the signal received, and a
MeterEXP (ExpertMeter) In this setting, the meter will simultaneously track multiple radar signals, including relative signal strength for each.
Meter SPC (Spec Display meter)
In this setting, the meter will display the actual numeric frequency of the radar signal received.
NOTE: The Spec Display feature is explained in more detail on page 11.
AutoMute
aMute ON (AutoMute on)
In this setting, the 9500ci’s audio alerts will initially be set to the volume you set, but after a few seconds, the 9500ci will automatically reduce the volume level, to keep you informed, but not annoyed. (factory default)
aMute OFF (AutoMute off)
With AutoMute off, the 9500ci’s audio alerts will remain at the volume you set for the duration of the encounter.
Units
Units ENG (units are in English) In this setting, all speed and distance related functions are displayed in English units. (factory default)
Units MET (units are in Metric)
In this setting, all speed and distance related functions are displayed in Metric units.
14 | 15 |