Motorola APCO25, BC796D manual Specifications

Page 66

Specifications

Certified in accordance with FCC Rules and Regulations Part 15, Subpart C, as of date of manufacture.

Channel:

1000

 

Banks:

10 (100 channels each)

Service Bands:

12 preprogrammed search bands

 

(including the NOAA Weather Service band)

Frequency Range:

25.0-28.0 MHz

Petroleum Prod., CB Class D channels,

 

 

Business and Forest Products

 

28.0-29.7 MHz

10 Meter Amateur Band

 

29.7-50.0 MHz

VHF Low Band

 

50.0-54.0 MHz

6 Meter Amateur Band

 

54.0-108 MHz

VHF TV, FM broadcast, Intersystem

 

 

and Astronomy

 

108-137 MHz

Aircraft Band

 

137-144 MHz

Military Land Mobile

 

144-148 MHz

2 Meter Amateur Band

 

148-174 MHz

VHF High Band

 

174-406 MHz

VHF TV, 1.25 Meter Amateur Band, UHF

 

 

Aircraft Band

 

406-420 MHz

Federal Government

 

420-450 MHz

70 cm Amateur Band

 

450-470 MHz

UHF Standard Band

 

470-512 MHz

UHF TV Band

 

806-956 MHz

800 Band

 

1240-1300 MHz

25cm Amateur Band

Operating Temperature: –20 °C to +60 °C (-4 °F to +140)

Scan Rate:

100 channels per second (conventional mode)

Search Rate:

100 steps per second (Normal Search)

 

300 steps per second (Turbo Search)

Audio Output:

Maximum 3.0W (2.3W normal @ 10% THD)

Internal Speaker:

8 ohms (56 mm outer diameter)

Power Requirements:

AD580U AC Adapter (13.8V DC, 700mA)

Antenna:

Telescopic Antenna (included)

Antenna Jack:

BNC type

External Jacks:

External Speaker (EXT.SP.) (3.5 mm)

 

DC 13.8 V Power Jack, (center is positive)

 

Remote Control (REMOTE) Jack (DB-9)

 

Tape Recorder Out (TAPE OUT) Jack (3.5 mm)

 

Digital Card Slot

Size:

6-15/16 in. (W) x 6-9/16 in. (D) x 2-3/8 in. (H)

 

176.5mm (W) x 167mm (D) x 61mm (H)

Weight:

1.44 kg (50.8 oz.)

Features and specifications are all subject to change without notice.

60

Image 66
Contents Page Page Contents General Programming Setting Apco 25 Sound Quality Programming LTR Systems Page FCC Wants You To Know Scanning Legally Introduction Page Using this Manual Simplex Operation Understanding ScanningConventional Scanning Repeater OperationTrunked Scanning Motorola TrunkingEdacs Trunking Understanding Banks and Channels LTR TrunkingGetting More Information Front and Rear View BC796DDisplay Icons Icon DescriptionIncluded With Your Scanner Mounting an Antenna Setting Up Your ScannerConnecting an Antenna Optional AntennaTypical Mounting Methods Mounting the Scanner in Your VehicleApplying Power for Vehicle Installation Connecting an External Speaker Desktop InstallationApplying Power Using Standard AC Power Connecting an EarphoneListening Safely Connecting the Clone CableConnecting the Tape Recorder RememberSetting the Squelch Basic OperationTurning On the Scanner Scanning Programmed Channels Using the MenuManually Selecting a Channel Locking/Unlocking BanksPriority Scanning Locking/Unlocking ChannelsRestoring All Locked Out Channels Priority Plus ScanningTurning the Key Beep On/Off Dimmer Light SettingControlling How Much Information Appears Locking the Enter keyMuting All Audio Setting Squelch ModeDisabling the APCO25 Card Trunk Scanning OptionsSelecting Talkgroup Lists to Scan Scanning Only Stored Talkgroups ID ScanMonitoring Talkgroup ID’s Holding on a Single TalkgroupEdacs Blockout Unlocking All TalkgroupsEdacs Patch Tracking Searching Setting Chain SearchSetting Data Skip Holding on an Active FrequencyStoring Found Frequencies Automatically Storing FrequenciesSearching for Subaudible Tones Setting Subaudible Tones for SearchingSetting Delay for All Search Ranges Attenuating All Search RangesSetting a Search Range Searching for Trunk SystemsPage Service Search Service Search SkipUsing Weather Search and Weather Alert Same Using Weather Alert SameSearching for a Weather Broadcast Testing the Weather Alert Bank Configuration Programming Bank InformationAssigning Bank Names Transferring Channel Information General ProgrammingDeleting Frequencies from Channels Entering Alpha InformationPage Enter the Frequency Programming Conventional ChannelsSelect a Channel to Program Assigning a Text TagSetting the Delay Setting the Subaudible Tone OptionSetting Beep Alert Setting the AttenuatorChanging the Frequency Step Setting the Modulation Mode Setting Priority ChannelsProgramming Trunked Systems Setting Trunking Delay Using I-Call Motorola and Edacs onlyTurning I-Call On and Off for ID Search Turning I-Call On for ID Scan Setting Priority Talkgroups Motorola and Edacs onlyMulti-Track Multi-Track Operational DetailsPage Using Control Channel Programming Programming Motorola SystemsProgramming Type 2/Digital 800 and 900 MHz Systems Programming Type2/Digital VHF and UHF Systems Programming Type I and IIi Hybrid Systems Toggling the Status Bit Toggling End Code DetectSetting Edacs Emergency Alert Programming Edacs SystemsProgramming Edacs Channels Setting Edacs Decimal Mode Setting Apco 25 Sound Quality Programming Apco 25 SystemsProgramming LTR Systems Programming Talkgroups Storing Known TalkgroupsStoring Found Talkgroups Deleting Stored Talkgroup ID’s Adding a Text Tag to an ID ListSeeing Talkgroup Activity Using the Remote Interface PC Control ModeCloning Scanner Settings Clone Master Unit Slave Unit Care and Maintenance Troubleshooting Problem Suggestion Specifications Glossary of Terms Page Page Preset Fleet Maps AppendixPreset Map Block User Defined Fleet Maps Type I Programming InformationFleet Map Size Codes Size Code RestrictionsNWR-SAME Event Code SVS Severe WX Reverse List BC796D Flow Charts Beep Alert System Option Dimmer One Year Limited Warranty Uniden America CorporationMemo Memo Memo