Digital Research Technologies DRSCAN36EPPR user manual Managing Scan Jobs With the Job Manager

Page 22

The buttons are (from left to right):

∙Frame - click on this button to adjust the size and location of the Selection box (you only need to click on this button after having used the Zoom In or Zoom Out button).

∙Zoom In / Zoom Out - click on these buttons then click on the preview image to reduce or increase its size.

∙Select Paper Size - click on this button to change the size of the Selection box (This can also be done by dragging the sides of the Selection box.).

∙Lock—Use this button if you plan to move or travel with the scanner. It will lock the internal mechanism so that it won’t get jarred during movement. This lock is functional for certain models only. If the lock is grayed out then disregard it.

Managing Scan Jobs With the Job Manager

The Job Manager is a useful tool for performing multiple scans on the same original. You can use the Job Manager to scan two or more separate areas of the preview image, or use it to capture two or more different versions of the same area.

To use the Job Manager to perform multiple scans, do the following:

1.After prescanning and adjusting any settings that you wish (such as moving and resizing the Selection box, adjusting resolution, brightness, etc.), click on the Job Manager button.

Create a new job button

22

Duplicate current job button

Delete current

Page 21 Page 23
Image 22
Page 21 Page 23
Contents DRSCAN36EPPR Table of Contents Appendix a Care and Maintenance Welcome Installing the Scanner What You NeedUnpacking the box Parallel cable is attached directly to the scannerSetting up the Scanner Plugging it To install the Twain driver and ScanOffix Pro, do Following Carriage Lock To install the Twain driver from the floppy diskNow whenever you want to scan, just open ScanOffix Pro Easy Twain Module Scanning ItemsSelect SF-1200CE+ Preview window To scan, do the following Scanning to Get the Best Image Image Resolution Image ModeBrightness and Contrast To change the brightness or contrast, do the following Shadow and Highlight Auto Levels Button Descreen ButtonGamma Curve Auto Settings To adjust the gamma curve, do the followingTo use the Auto Settings, do the following Control PanelManaging Scan Jobs With the Job Manager Page Page Care and Maintenance Safety PrecautionsCleaning the Scanner To clean the ScannerFrequently Asked Questions Appendix BPage Page Page Page Page Scanner Specifications Appendix CColor Bit RGB Gray scale 12-bit Power consumption Maximum Noise Under 55 dB operating Glossary Optical Character Recognition OCR. The ScanOffix S.EColor image, grayscale image, halftone image, line art image Preview button See driver Copyright Information
Top Page Image Contents