2Plug the adapter cable in the wall outlet.
3Connect one end of your USB cable to the USB port on your scanner. Make sure you connect the correct plug as shown in the figure below.
4Connect the other end of your USB cable to a USB port on your computer.
Make sure you connect it to the correct port as shown in the figure. A USB port is marked with the USB icon 
.
Installing Additional Software
If you want to use OCR (Optical Character Recognition) you will have to install Readiris Pro. Insert the
For a general overview of the possible workflows, please consult the Navigation Map, which is supplied with your scanner.
Chapter 4: Installing the Scanner for Macintosh | 37 |