AGFA E40, E50 appendix Selecting a Different ScanWise Configuration SnapScan e50

Selecting a Different ScanWise Configuration (SnapScan e50)

It is possible to assign a different configuration to one of the four buttons of your SnapScan e50. Following example will show you how it is done.

In this example we will change the settings of the e-mail button into a configuration that will send the scanned image to a file.

1Open the Agfa ScanWise software.

2Select Configure Buttons from the Tools menu. The Configure Buttons window appears.

a.e-mail button

b.print button

c.ScanWise button

d.OCR button

3Click the drop-down list next to the e-mail button.

4Select Scan Image to File (autoselect).

5Click OK.

Pushing the e-mail button will send the scanned image to a file instead of to your mail recipient.

!Note: The same procedure can be applied to the print, ScanWise and OCR button.

Chapter 5: Configuring Buttons on your Macintosh Computer (SnapScan e50) 39