3Choose a new button cap.
4Slide the button cap over the button panel.
5Press down the button cap in the right position.
Unlocking the Scanner
Before you start using the scanner, you first have to unlock it.
1Place the scanner on a horizontal, flat surface and pull it carefully towards you until you can see the locking slider at the bottom.
2Slide the locking slider to the right.
Your scanner is unlocked.
#Note: If you want to transport your scanner, you have to lock it. To do this, first connect the AC adapter to the scanner so that its optical assembly moves to its home position. Then, slide the locking slider to the left and disconnect the scanner. Your scanner is now locked and ready for transportation.
Caution: Make sure to install the ScanWise software before connecting the scanner to your PC or Macintosh computer.
Chapter 1: Preparing the Scanner | 16 |