P1 Pan I nvert / P2 T ilt I nvert | Chauvet Q-Scan 150, Q-Roll 150

User Configurations

P1 - Pan I nvert / P2 - T ilt I nvert

It is possible to invert the pan and tilt mirror movement from within the fixture itself. This could be helpful in situations where the positioning or rigging of a fixture led to a reverse orientation of the fixture in relation to all or most other fixtures installed. When choosing to command the pan or tilt of all fixtures at the same time you will notice that the fixtures whose orientation is different from the others will most likely move opposite of the rest. You can apply a pan and tilt Invert by following the settings in the table below.

FUNCTION	SET TO
P1	-y
P2	-y
P1 & P2	-n

NOTES

Pan Invert

Tilt Invert

Return to normal

Segment Display Configurations

The display can be inverted making it easier to read the menu depending on the orientation of your fixture.

P8 - D ispl ay I nvert

FUNCTION

SET TO

-y

-n

NOTES

Invert display

Return to normal

Service Functions

P3 - Fi xtu re R eset (al l m oto rs)

This function will re-initialize the fixture by returning all motors to its startup positions or otherwise known as (home position).

FUNCTION

SET TO

-y

-n

NOTES

Reset fixture

Skip function

Q-Scan 150 & Q-Roll 150 User Manual

2005-11-15/13:23