Clevo D901C manual Removing the Hard Disk Drive, HDD Assembly Removal

Removing the Hard Disk Drive

The hard disk drive is mounted in a removable case and can be taken out to accommodate other 2.5" SATA hard disk drives with a height of 9.5mm (h). Follow your operating system’s installation instructions, and install all necessary driv- ers and utilities (as outlined in Chapter 4 of the User’s Manual) when setting up a new hard disk.

Hard Disk Upgrade Process

1.Turn off the computer, and turn it over and remove the battery (page 2 - 5).

2.Locate the hard disk bay cover and remove screws 1 - 4 .

3.Remove the bay cover 5 .

4.	Remove screws	6 - 8 release the cable 9 and lift the hard disk assembly 10 out of the computer.
5.	Remove screws	11 - 18 .
6.	Separate the hard disk(s) 21 from the bracket 19 and connector cable 20 .
7.	Reverse the process to install a new hard disk(s).

Disassembly

Figure 3

HDD Assembly

Removal

a. Remove the screws. b. Remove the cover

c. Release the cable and lift the hard disk assembly up out off the computer.

d. Remove the screws and separate the HDD(s) from the bracket and connector.

2.

a.	c.	d.
	9		21
1	2
3	7
	4	13	14
	6			15	
b.		19		16
	8	12			5. Hard Disk Bay Cover
		11
				20	10. Hard Disk Assembly
		18
			17		19. HDD Braket
					21. HDD
	10				• 15 Screws

5

Disassembly

Removing the Hard Disk Drive 2 - 7