Clevo D901C manual Removing the VGA Card, VGA Card Removal

Disassembly

Figure 8

VGA Card Removal

a. Remove the screws. b. Remove the cover.

c. Remove the screws and disconnect the cable(s). d. Release the VGA card

fans.

e. Remove the screws.

Removing the VGA Card

1.Turn off the computer, and turn it over and remove the battery (page 2 - 5).

2.Locate the VGA bay cover and remove screws 1 - 10 .

3.Lift off the bay cover 11 .

4.Remove screws 12 - 17 from the VGA card fans.

5.Disconnect the fan cable(s) 18 & 19 .

6.Remove the VGA card fan 20 .

7.Remove screws 21 - 24 from the VGA card module(s).

2.Disassembly



11.Bay Cover

20.VGA card fans

• 20 Screws

a.		1	2	c.	Slot B		Slot A
10				3
9	8	6	5	4
		7			14	15	17
					12
					18		19
					13		16
b.				d.			e.
		11		20	20

21

VGA Card Fans



Notes

Two VGA cards are pic- tured. If you are install- ing a single VGA card, it should be installed in Slot A.

22 23 24

2 - 12 Removing the VGA Card