Clevo D901C manual Removing the Keyboard, Keyboard Removal

6

7

Removing the Keyboard

1.Turn off the computer, and turn it over and remove the battery (page 2 - 5).

2.Press the four keyboard latches at the top of the keyboard to elevate the keyboard from its normal position (you may need to use a small screwdriver to do this).

3.Carefully lift the keyboard 5 up, being careful not to bend the keyboard ribbon cable 6 (Figure c).

4.Disconnect the keyboard ribbon cable 6 from the locking collar socket 7 .

5.Carefully lift up the keyboard 5 (Figure d) off the computer.

a.c.

1 2 3 4

b.d.

5

5

Keyboard Tabs

Disassembly

Figure 11

Keyboard Removal

a. Press the four latches to release the keyboard.

b. Lift the keyboard up.

c. Disconnect the cable from the locking collar.

d. Remove the keyboard.



Re-Inserting the Key-

board

When re-inserting the keyboard firstly align the five keyboard tabs at the bottom (Figure b) at the bottom of the keyboard with the slots in the case.



5. Keyboard

2.Disassembly

Removing the Keyboard 2 - 15