Compaq 305 specifications Removing the RTC Battery

Page 36

Presario 305 Model

Before You Begin

 

Specifications

 

 

 

 

 

 

Removal Sequence

 

Troubleshooting

 

 

 

 

 

 

Product Description

 

Pin Assignments

 

 

 

Removing the RTC Battery

Removal

Sequence

Serial Number

Location

Preparing for

Disassembly

Electrostatic

Discharge

Service

Considerations

Cables and

Connectors

Multi-media

Expansion

Unit

Battery Pack

Hard Drive

Modem Card

RTC Battery

Keyboard

Memory Board

Switch Cover

Display Panel

Deck

Voltage

Converter

Board

Modem

Connector

Board

PC Card

PC Card

Assembly

System Board

Parts Catalog

Battery Operations

Index

To remove the RTC battery, complete the following steps:

1. Remove

the Multi- media Expansion Unit.

2. Turn the computer upside down with the back of the computer facing forward.

3. Remove the RTC battery cover by lifting the cover at the indention.

4. Remove the RTC battery from the base enclosure.

5. Disconnect the RTC battery cable from the system board to remove the battery.

To replace the RTC battery, reverse the removal procedures.

Image 36
Contents Before You Begin IndexMaintenance and Service Guide Symbols PrefaceProduct Description Models and Features Models and FeaturesUpper Unit Components Upper Unit ComponentsFront Components Front ComponentsLeft Side Components Left Side ComponentsRight Side Components Right Side ComponentsBottom of Unit Bottom UnitRear Connectors Rear ConnectorsMulti-media Expansion Base Multi- media Expansion UnitPower Management for Windows Power Management SettingsRemoving the Battery Pack Battery PackBack to step Removing the Multi-media Expansion unit Multi-media Expansion UnitSerial Number Location Serial Number LocationPreparing for Disassembly Preparing for DisassemblyRemoval and Replacement Procedures Generating StaticRelative Humidity Event 10% 40% 55% Removal Sequence Tool and Software Requirements Cables and Connectors Plastic PartsZIF Connectors Display Panel Cable Location Inverter Cable Location Audio Cable Location Touchpad Cable Location Fan Cable Location Light Board Cable Location Speaker Cable Location Battery Cable Location Removing the Hard Drive Hard DriveTo replace the hard drive, reverse the removal procedures Removing the Modem Card Modem CardRemoving the Modem Card Removing the RTC Battery RTC BatteryRemoving the Keyboard KeyboardZIF connector Removing the Memory Board Memory BoardRemoving the Switch Cover Switch CoverPosition the computer so the front faces forward Removing the Display Panel Display PanelTo replace display panel, reverse the removal procedures Removing the Deck DeckRemove seven screws T8 from the underside of the unit Insertion Force Connector Back to step Removing the Voltage Converter Board Voltage Converter BoardBack to step Removing the Modem Connector Board Modem Connector BoardRemoving the PC Card PC CardRemoving the PC Card Assembly PC Card AssemblyRemoving the System Board System BoardBefore You Begin Specifications Back to step Troubleshooting Use AC power when running POST, Computer Preliminary StepsPower-On Self Test Post Running PostClearing the Power-on Password Compaq Diagnostics Computer SetupComputer Checkup Test View System Information InspectContacting Compaq Support Shipping PreparationDiagnostic Error Codes ProceduresDiagnostic Error Codes Troubleshooting Without Diagnostics USBSolving Minor Problems ProblemProbable Cause Display Problems Global Settings tab, the enable Problem Cause SolutionsInfrared Problems Battery Pack Operating Time Connector Pin Assignments Connector Pin SignalIllustrated Parts Catalog System Components System Unit Description Part NumberExternal Cables Miscellaneous Plastics Kit Description PartScrew Kit Miscellaneous Parts DescriptionDocumentation and Software Suffix MonthSpecifications Physical and EnvironmentalSystem I/O Address Diskette Drive