Apple Z0PY2LL/A, MD318LLA Installing Additional Memory, To install memory in your MacBook Pro

Installing Additional Memory

Your computer has two memory slots that you access by removing the bottom case. Your MacBook Pro comes with a minimum of 4 gigabytes (GB) of 1333 MHz Double Data Rate (DDR3) Synchronous Dynamic Random-Access Memory (SDRAM) installed. Each memory slot can accept an SDRAM module that meets the following specifications:

ÂÂ Double Data Rate Small Outline Dual Inline Memory Module (DDR3) format ÂÂ 30 mm (1.18 inches)

ÂÂ 204-pin

ÂÂ 2 GB or 4 GB

ÂÂ PC3-10600S DDR3 1333 MHz Type RAM

You can add two 4 GB memory modules for a maximum of 8 GB of memory. For best performance, fill both memory slots and install an identical memory module in each slot.

To install memory in your MacBook Pro:

1Follow steps 1 and 2 beginning on page 37 to remove the bottom case.

Important:  When you remove the bottom case, you expose sensitive internal components, which can be affected by static electricity.

2Before touching the memory assembly, discharge any static electricity from your body by touching a metal surface inside the computer.

44Chapter 3   Boost Your MacBook Pro