29 | Removing the WirelessHD |
Card |
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/ regulatory_compliance.
If you ordered a wirelessHD card with your computer, the card is already installed.
Prerequsites
1Remove the battery pack. See "Removing the Battery Pack" on page 12.
2Remove the compartment door. See "Removing the Compartment Door" on page 14.
3Remove the center control cover. See "Removing the Center Control Cover" on page 41.
4Remove the keyboard. See "Removing the Keyboard" on page 45.
Procedure
1Disconnect the wirelessHD card cable from the connector on the wirelessHD card.
2Remove the screw that secures the wirelessHD card to the system board.
3Lift the wirelessHD card out of the connector on the system board.
3
2
|
| 1 |
|
|
|
|
|
|
|
1 | wirelessHD card cable | 2 wirelessHD card |
|
|
|
|
|
|
|
3 | screw |
|
|
|
|
|
|
| 53 |
|
| Removing the WirelessHD Card |