30 | Replacing the WirelessHD |
Card |
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/ regulatory_compliance.
If you ordered a wirelessHD card with your computer, the card is already installed.
Procedure
1Remove the new wirelessHD card from its packaging.
CAUTION: Use firm and even pressure to slide the card into place. If you use excessive force, you may damage the connector.
CAUTION: The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors on the card and on the system board, and realign the card.
2Insert the wirelessHD card connector at a
3Press the other end of the wirelessHD card down into the slot on the system board and replace the screw that secures the wirelessHD card to the system board.
4Connect the wirelessHD card cable to the connector on the wirelessHD card.
Postrequsites
1Replace the keyboard. See "Replacing the Keyboard" on page 48.
2Replace the center control cover. See "Replacing the Center Control Cover" on page 44.
3Replace the compartment door. See "Replacing the Compartment Door" on page 15.
4Replace the battery pack. See "Replacing the Battery Pack" on page 13.
5Follow the instructions in "After Working Inside Your Computer" on page 11.
54 | Replacing the WirelessHD Card |