Acer 4010 manual Parameter Description Format/Option

The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings.

Parameter	Description	Format/Option
System Time	Sets the system time. The hours are displayed	Format: HH:MM:SS
	with 24-hour format.	(hour:minute:second) System Time
System Date	Sets the system date.	Format MM/DD/YYYY (month/day/
		year)
		System Date
System Memory	This field reports the memory size of the system.
	Memory size is fixed to 640MB
Extended Memory	This field reports the memory size of the
	extended memory in the system.
	Extended Memory size=Total memory size-1MB
VGA Memory	Shows the VGA memory size. VGA Memory
	size=64/128MB
Fast Boot	Determines if Customer Logo will be displayed or	Option: Enabled or Disabled
	not; shows Summary Screen is disabled or
	enabled.
	Enabled: Customer Logo is displayed, and
	Summary Screen is disabled.
	Disabled: Customer Logo is not displayed, and
	Summary Screen is enabled.
Power on display	Auto: During power process, the system will	Option: Auto or Both
	detect if any display device is connected on
	external video port. If any external display device
	is connected, the power on display will be in CRT
	(or projector) only mode. Otherwise it will be in
	LCD only mode.
	Both: Simultaneously enable both the integrated
	LCD screen and the system’s external video port
	(for an external CRT or projector).
LCD Auto Dim	Determines if the system will automatically dim	Option: Enabled or Disabled
	the LCD brightness in order to save power when
	AC is not present.
	The system will support an automatic dimming of
	the LCD backlight when the AC power is NOT
	available (running on battery power).
Network Boot	Enables, disables the system boot from LAN	Option: Enabled or Disabled
	(remote server).
F12 Boot Menu	Enables, disables Boot Menu during POST.	Option: Disabled or Enabled
D2D Recovery	Enables, disables D2D Recovery function. The	Option: Enabled or Disabled
	function allows the user to create a hidden
	partition on hard disc drive to store operation
	system and restore the system to factory
	defaults.

NOTE: The sub-items under each device will not be shown if the device control is set to disable or auto. This is because the user is not allowed to control the settings in these cases.

Chapter 2 39