IDE Primary/Secondary Channel Master/Slave Setup
The following screen appears if you select any of the IDE drive parameters:
The following table describes the parameters found in this menu. Settings in boldface are the default and suggested settings.
Parameter | Description | Options |
|
|
|
IDE HDD Auto- | Press [Enter] | |
Detection |
|
|
|
|
|
IDE Primary Master | Display the type of device installed. | Auto |
|
| None |
|
| Manual |
|
|
|
Access Mode | Selects the HDD access mode | Auto |
|
| Large |
|
| LBA |
|
| CHS |
|
|
|
Capacity | Shows the size of your HDD in MB | xxxxx MB |
|
|
|
Cylinder | Shows your hard disk’s numberof cylinders | 0 to 65535 |
|
|
|
Head | Shows your hard disk’s number of heads | 0 to 255 |
|
|
|
Precomp | Selects the precomp number for old HDD parking | 0 to 65535 |
|
|
|
Landing Zone | Selects the Land Zone number for old HDD parking | 0 to 65535 |
|
|
|
Sector | Shows your hard disk’s number of sectors | 0 to 255 |
|
|
|
31 | Chapter 2 |