AC Adapter
Item | Specification |
|
|
DC output voltage | 19V |
|
|
Noise + Ripple | |
|
|
Load | 0(min) 3.16A(max) |
|
|
Output Ratings (CC mode) |
|
|
|
DC output voltage | 19V |
|
|
Constant current mode | 3.6 +/- 0.3A |
|
|
Dynamic Output Characteristics |
|
|
|
3 sec (@ 115Vac) | |
|
|
Hold up time | 5ms (@115Vac, Full load) |
|
|
Over Voltage Protection (OVP) | 24V |
|
|
Short circuit protection | 3.9A max can be protected and output can be shorted without damage |
|
|
Electrostatic discharge (ESD) | 15KV (at air discharge) |
| 8KV (at contact discharge) |
|
|
Dielectric Withstand Voltage |
|
|
|
Primary to secondary | 3000Vac |
|
|
Leakage current | 0.25 mA max. (@ 254Vac, 60Hz) |
|
|
Regulatory Requirements | Safety Requirements: |
| 1.The subject product rated |
| certified with SCA Standard C22.2 No.950. |
| 2.The subject product rated |
| directive 73/23EEC. |
| EMI Requirements: |
| 1.The subject product rated |
| of FCC part 15, Subpart B for Class B Digital Device and get FCC Certification |
| before marketing into USA and Canada. |
| 2.The subject product rated |
| 336/EEC. |
| 3.The subject product rated |
| requirements. |
|
|
Power Management
Power Saving Mode | Phenomenon |
|
|
Standby Mode | The buzzer beeps |
Enter Standby Mode when | The Sleep indicator lights up |
| |
1.Standby/Hibernation |
|
and system is not ready to enter Hibernation |
|
mode. |
|
2.System standby/ Hibernation timer expires |
|
and system is not ready to enter Hibernation |
|
mode. |
|
|
|
Hibernation Mode | All power shuts off |
Enter Hibernation Mode (suspend to HDD) |
|
when |
|
1.Hibernation |
|
system is ready to enter Hibernation mode |
|
2.System Hibernation timer expires and |
|
system is ready to enter Hibernation mode. |
|
Display Standby Mode | The display shuts off |
Keyboard, |
|
PS/2 pointing device are idle for a specified |
|
period. |
|
|
|
Chapter 1 | 29 |