Installing the LCD Module
Installing the LCD Module
1.Place the LCD module to the main unit.
2.Fasten the LCD module with the two screws on the bottom; one on the right and another one on the left.
3.Secure the LCD hinge with the four screws; two on the right and two on the left.
4.Connect the inverter cablet to the main board. Connect the LCD coaxial cable to the maine board. Then fasten the LCD coaxial cable with one screw.
Installing the Launch Board
1.Attach the launch board to the middle cover. Then secure the launch board with the two screws as the picture shows.
87 | TravelMate 240/ 250 |