14.Connect the touchpad cable to the main board.
Installing the Processor
1.Lift up the CPU lever, then place the CPU back to the CPU socket carefully. Please remember to press the CPU lever after you put the CPU back to the socket.
Installing the Thermal Module
1.See “Installing the Speaker Set” on page 86.
2.See “Installing the DC Board” on page 86.
3.See “Installing the PCMCIA Slot” on page 86.
4.See “Installing the Main Board” on page 86.
5.See “Installing the HDD Bracket” on page 87.
6.See “Installing the ODD Module” on page 87.
7.See “Installing the CPU Heatsink Plate” on page 88.
8.See “Installing the VGA Heatsink Plate” on page 88.
9.See “Installing the Floppy Disk Drive Module” on page 88.
10.See “Installing the Touchpad Cable” on page 89.
11.See “Installing the Touchpad Board” on page 89.
12.See “Installing the Upper Case Assembly” on page 90.
79 | TravelMate 240/ 250 |