3.See “Removing the LCD Module” on page 57.
4.See “Removing the Keyboard” on page 63.
5.See “Removing the Upper Case Assemly” on page 65.
6.See “Removing the Touchpad Board” on page 66.
7.Remove the touchpad scroll key then remove the touchpad cable.
Removing the Floppy Disk Drive Module
1.See “Removing the Middle Cover” on page 56.
2.See “Removing the LCD Module” on page 57.
3.See “Removing the Keyboard” on page 63.
4.See “Removing the Upper Case Assemly” on page 65.
5.Disconnect the FDD cable from the main board.
6.Remove the two screws hastening the FDD module. Detach the FDD module from the lower case.
Dissembling the Floppy Disk Drive Module
1.Disconnect the FDD cable.
2.Remove the two screws that fasten the FDD bracket on one side.
67 | TravelMate 240/ 250 |