Acer VD.T39V1.001 manual AC Adapter

LCD

Item	Specification
Contrast Ratio	250 : 1 Typ.
Optical Rise Time/Fall Time [msec]	30Typ.,50 MAX.
Nominal Input Voltage VDD [Volt]	+3.3 Typ.
Power Consumption [Watt]
(VDD Line)	1.2 Typ.
(VCFL Line)	3.5 Typ.
Electrical Interface	4 pairs, single LVDS
Temperature Range [degree C]
Operating	0 to +50
Storage (Shipping)	-20 to +60

AC Adapter

Item		Specification
Vendor & model name	Lite-on 65W PA 1650-02 (WPFC) 3P
Input Requirements
Maximum input current (A,	1.7A max@3.5A/100Vac and 240 Vac
@100Vac, full load)
Nominal frequency (Hz)	50 / 60
Frequency variation range (Hz)	47 - 63
Nominal voltages (Vrms)	100 - 240
Inrush current	The maximum inrush current will be less than 220A when the adapter is
	connected to 100Vac(60Hz) and 240Vac(50Hz) respectively.
Efficiency	High efficiency 82% minimum, at 100~240Vac AC input, full load, warm-up
	condition.
Output Ratings (CV mode)
DC output voltage	Offers constant voltage 19.0V output source with 65W max output power
	capacity.
Noise + Ripple	380mvp-pmax (20MHz bandwidth) for resistor load
Output current	0A (min.)	3.42A (max.)
Output Ratings (CC mode)
DC output voltage	18.05 ~ 19.95V
Constant output	3.8A
Dynamic Output Characteristics
Start-up time	5 sec. (@115 Vac and 230Vac full load)
Hold up time	5ms min. (@115 Vac input, full load)
Over Voltage Protection (OVP)	29V
Short circuit protection	Output can be shorted without damage, and auto recovery
Electrostatic discharge (ESD)	15kV (at air discharge)
	8kV (at contact discharge)
Dielectric Withstand Voltage
Primary to secondary	2150Vdc 10mA for 1 second
Leakage current	60uA max (240Vac, 60Hz)
Regulatory Requirements	Internal filter meets;
	1. FCC class B requirements.
	2. VDE 243/1991 class B requirements.
	3. CISPR 22 Class B requirements.
	3. VCCI class II requirements.

Chapter 1 23