Acer VD.T39V1.001 manual Parameter Description Format/Option

The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings.

Parameter	Description	Format/Option
System Time	Sets the system time.	Format: HH:MM:SS
		(hour:minute:second) System Time
System Date	Sets the system date.	Format: MM/DD/YYYY (month/day/
		year)
		System Date
System Memory	This field reports the memory size of the system.
	The user can not change the memory setting.
	This is display-only field.
	Memory size is fixed to 640 KB
Extended Memory	This field reports the memory size of the
	extended memory in the system. The user can
	not change the memory setting. This is display-
	only field.
	Extended Memory size=Total memory size -1MB
VGA Memory	The total amounts of memory for VGA. The user
	can not change the memory setting. This is
	display-only field.
Quiet Boot	Determines if Logo will be displayed or not;	Option: Enabled or Disabled
	shows diagnostic screen is disabled or enabled.
	Enabled: Logo is displayed, and diagnostic
	screen is disabled.
	Disabled: Logo is not displayed, and diagnostic
	screen is enabled.
Power on display	Selects display device.	Option: Auto or Both
	Auto: During power process, the system will
	detect if any display device is connected on
	external video port. If any external display device
	is connected, the power on display will be in CRT
	(or projector) only mode. Otherwise it will be in
	LCD only mode.
	Both: Simultaneously enable both the integrated
	LCD screen and the system’s external video port
	(for an external CRT or projector).
LCD Auto Dim	Determines if the system will automatically dim	Option: Enabled or Disabled
	the LCD brightness in order to save power when
	AC is not present.
PXE Boot From LAN	Selects PXE boot from LAN function.	Option: Enabled or Disabled
F12 Boot Menu	Selects the F12 boot menu function.	Option: Enabled or Disabled

NOTE: The sub-items under each device will not be shown if the device control is set to disable or auto. This is because the user is not allowed to control the settings in these cases.

Chapter 2 31