Yamaha CRW3200SX manual Disc tray does not open when you press the eject button

Page 32

Troubleshooting

BIOS

The Basic Input/Output System (BIOS) is a basic control program for the data access between a computer and peripheral devices. Generally, the BIOS resides on a computer motherboard, a ROM chip of an extension card, or a flash memory. The BIOS checks the system and recognizes devices (such as serial ports or hard disk controllers) prior to starting up the operating system.

Is the proper SCSI driver (mini-port driver) installed? (For Windows)

Be sure that the latest SCSI driver for the SCSI card is installed. For information about the latest SCSI driver for the SCSI card, contact manufacturer of the SCSI card.

Is the CRW3200SX drive connected to the SCSI card properly with the SCSI cable?

Turn off the CRW3200SX drive and the computer. Check that the SCSI cable is fully connected to the CRW3200SX drive. (P. 12)

Is the CRW3200SX drive’s SCSI ID number is different from other devices’?

If SCSI devices other than the CRW3200SX drive are used, be sure that the CRW3200SX drive’s SCSI ID number is different from other devices’. (P. 10)

Is the CRW3200SX drive’s SCSI ID number is different from the SCSI card’s?

If the CRW3200SX drive’s SCSI ID number is set to “7,” set it to other ID number that are not used by other SCSI devices. (P. 10)

Aren’t the pins of the SCSI connectors damaged?

Check that the pins of the SCSI connectors are not deformed.

Is the terminator set properly?

Be sure that the terminator of the last device of the SCSI chain is set to ON while the other devices are set to OFF. (P. 11)

If the CRW3200SX drive is still not recognized, contact the store of purchase or your nearest Yamaha dealer (listed at the back of this manual).

4 The disc tray does not open when you press the eject button.

Is the CRW3200SX drive turned on? (Does the LED on the front panel light?)

Refer to “The CRW3200SX drive is not turned on when the power switch is ON. (The front panel LED does not light.).” (Troubleshooting, Item 1)

Is any CD writing software being used?

Some CD writing software prohibits ejecting while accessing. (If you are using such a software program, the disc tray does not open even if the eject button is pressed.) In such a case, follow the steps in the software window to eject the disc, or quit the CD writing software prior to pressing the eject button.

23

Image 32
Contents Page FCC Information U.S.A Achtung Page English Safety Precautions Iii Warranty Precautions for TransportationTable of Contents Features of the CRW3200SX Drive High speed writing/readingSafeBurn Enhanced stability writing technology High fidelity digital audioNames and Functions of Parts Front PanelRear Panel Names and Functions of PartsPrecautions on Use Handling DiscsCopyright Disclaimer of IndemnityCompatible Discs Discs that can be written onCD-R discs CD-RW discsSystem Requirements For WindowsPartial CAV Constant Angular Velocity Computer PC/AT compatibleCD writing software Image fileOperating system For Macintosh Computer MacintoshSet up the CRW3200SX Drive Preparing the CRW3200SX DriveSerial Number Serial Number➀ Scsi ID Number Scsi ID 7∗Preparing the CRW3200SX Drive ➁TerminationConnect the CRW3200SX Drive Turn off the computer and all peripheral devicesHalf-pitch 50-pin Centronics Scsi cableSub half-pitch 50-pin pin-type for the CRW3200SX drive DC-IN connector Screw Arrow Turn on the power switch of the CRW3200SX drive Check Recognition of the CRW3200SX Drive For Windows 95/98/98 Second Edition/MeFor Windows 2000 Professional For Windows XPChange the Sync data transfer setting Drive name is not shown or there is or markInstall CD Writing Software Preparing the CRW3200SX Drive For MacintoshLoading/Ejecting a Disc Loading/Ejecting a Disc Manually Ejecting a Disc Troubleshooting Are the AC adapter and the power cable connected properly?Is the Scsi card installed properly? Operating system does not start up properlyDisc tray does not open when you press the eject button Aren’t the pins of the Scsi connectors damaged?Is the terminator set properly? Is any CD writing software being used?Is the disc tray opened when the computer is restarted? Disc is ejected without order or it comes out spontaneouslyIs the disc icon shown on the screen? For Macintosh Is the disc set properly horizontally on the disc tray?Troubleshooting No data can be read from a disc Playback of an audio CD CD-DA cannot be heardIs the disc ejected without order? Is the disc compatible with the drive? PFor Windows Me Select Is there any problem with other Scsi devices? Error message Buffer Underrun is shownOther problems Firmware Checking the firmware version in the CRW3200SX driveFor Windows 2000 Professional/XP For MacintoshCRW3200SX Drive Specifications Supported Formats Write Read Play back *4CRW3200SX Drive Specifications ModeAC adapter AD-301205 CRW3200SX Drive Specifications Safety/EMC Compliance CRW3200SX drive conforms to the following specificationsTechnical Notes Buffer Underrun Protection FunctionWriting Methods Disc-at-Once DAOTechnical Notes Session-at-Once SAO Packet WritingCanada

CRW3200SX specifications

The Yamaha CRW3200SX is a high-performance CD-RW drive that stands out for its impressive range of features and cutting-edge technologies. Designed for both professional and home users, this drive delivers exceptional audio and data recording capabilities, making it a popular choice for musicians, producers, and anyone who values high-quality audio.

One of the standout features of the CRW3200SX is its impressive writing speed. With a maximum writing speed of 32x for CD-R media, it allows users to efficiently create CDs without sacrificing quality. Additionally, the drive supports a variety of disc formats, including CD-R, CD-RW, and CD-MRW, making it versatile enough to handle different recording needs.

The CRW3200SX also incorporates advanced technologies to enhance the recording process. Its Automatic Write Speed feature intelligently adjusts the writing speed in real-time, ensuring optimal performance and reducing the risk of errors during the burning process. This ensures that users can confidently produce high-fidelity audio recordings with minimal hassle.

Another significant technology featured in the Yamaha CRW3200SX is the DiscT@2 technology. This innovative feature allows users to print designs or text directly onto the CD's surface during the burning process. This not only provides a professional look to the final product but also adds a personal touch, making it ideal for custom music releases or promotional materials.

In terms of audio performance, the CRW3200SX is equipped with Yamaha's proprietary R&D technologies that deliver pristine sound quality. With high-quality analog-to-digital conversion and low jitter, users can expect accurate and detailed audio reproduction. This drive is designed to meet the needs of audiophiles who demand nothing but the best in terms of sound quality.

The build quality of the Yamaha CRW3200SX is robust, ensuring durability and longevity. Its external design is sleek and modern, making it an attractive addition to any setup. Moreover, it features an easy-to-navigate interface, making it user-friendly for individuals at any experience level.

Overall, the Yamaha CRW3200SX is a versatile and reliable CD-RW drive that combines speed, quality, and innovative features. Whether for professional audio production or personal use, it delivers exceptional performance that meets the demands of modern users. With its advanced technologies and user-oriented design, the CRW3200SX remains a top choice for anyone looking to create high-quality audio CDs.