Yamaha CRW3200SX manual Change the Sync data transfer setting

Page 27

Figure 2 (scroll down)

The drive name is not shown or there is or mark.

The CRW3200SX drive has not been recognized properly. Check the cable connections and settings.

3 Change the Sync data transfer setting.

For Windows 95/98/98 Second Edition/Me

1 In the Device Manager dialog box (P. 16), select YAMAHA CRW3200S Properties and then Settings tab.

2 Check the “Sync data transfer.”

With sync data transfer, the data transfer speed between the CRW3200SX and the computer is faster than asynchronous transfer speed.

Check

(This screen is an example on Windows Me.)

Note

•For details, refer to the documentation that comes with the SCSI card.

•For Windows 2000 Professional/XP, “Sync data transfer” will be automatically selected if the SCSI card supports this feature.

Image 27

Contents Page FCC Information U.S.A Achtung Page English Safety Precautions Iii Precautions for Transportation WarrantyTable of Contents High fidelity digital audio Features of the CRW3200SX DriveHigh speed writing/reading SafeBurn Enhanced stability writing technologyFront Panel Names and Functions of PartsNames and Functions of Parts Rear PanelDisclaimer of Indemnity Precautions on UseHandling Discs CopyrightCD-RW discs Compatible DiscsDiscs that can be written on CD-R discsComputer PC/AT compatible System RequirementsFor Windows Partial CAV Constant Angular VelocityImage file Operating systemCD writing software Computer Macintosh For MacintoshSerial Number Set up the CRW3200SX DrivePreparing the CRW3200SX Drive Serial NumberScsi ID 7∗ ➀ Scsi ID Number➁Termination Preparing the CRW3200SX DriveTurn off the computer and all peripheral devices Connect the CRW3200SX DriveScsi cable Sub half-pitch 50-pin pin-type for the CRW3200SX driveHalf-pitch 50-pin Centronics DC-IN connector Screw Arrow Turn on the power switch of the CRW3200SX drive For Windows 95/98/98 Second Edition/Me Check Recognition of the CRW3200SX DriveFor Windows XP For Windows 2000 ProfessionalDrive name is not shown or there is or mark Change the Sync data transfer settingPreparing the CRW3200SX Drive For Macintosh Install CD Writing SoftwareLoading/Ejecting a Disc Loading/Ejecting a Disc Manually Ejecting a Disc Operating system does not start up properly TroubleshootingAre the AC adapter and the power cable connected properly? Is the Scsi card installed properly?Is any CD writing software being used? Disc tray does not open when you press the eject buttonAren’t the pins of the Scsi connectors damaged? Is the terminator set properly?Is the disc set properly horizontally on the disc tray? Is the disc tray opened when the computer is restarted?Disc is ejected without order or it comes out spontaneously Is the disc icon shown on the screen? For MacintoshIs the disc compatible with the drive? P Troubleshooting No data can be read from a discPlayback of an audio CD CD-DA cannot be heard Is the disc ejected without order?For Windows Me Select Error message Buffer Underrun is shown Other problemsIs there any problem with other Scsi devices? For Macintosh FirmwareChecking the firmware version in the CRW3200SX drive For Windows 2000 Professional/XPSupported Formats Write Read Play back *4 CRW3200SX Drive SpecificationsMode CRW3200SX Drive SpecificationsAC adapter AD-301205 CRW3200SX drive conforms to the following specifications CRW3200SX Drive Specifications Safety/EMC ComplianceDisc-at-Once DAO Technical NotesBuffer Underrun Protection Function Writing MethodsPacket Writing Technical Notes Session-at-Once SAOCanada