Mitsubishi Electronics HC6000 user manual Menu operation, How to set the menus, Image menu

Menu operation (continued)
How to set the menus:	4. Press the S or T button to select an item to
The following describes how to set AUTO POWER	adjust.
OFF time as an example.		AUTO POWER	OFF
		ON
1. Press the MENU button.			OFF
		AUTO POWER
		OFF

opt.		5. Set the selected item by pressing the W or X
IMAGE	AV MEMORY 1	button.
2. Press the W or X button to select a menu to use.		AUTO POWER	OFF
		ON
		AUTO POWER	30 min
		OFF
opt.
		To cancel the menu:
INSTALLATION	AV MEMORY 1	6. Press the MENU button several times.

3. Press the ENTER button (or T button).					Important:
					• When the MENU button doesn’t function, unplug
			opt.
					the power cord from the wall outlet. Wait about 10
	INSTALLATION			AV MEMORY 1	minutes, plug the power cord in, and try again.
					• After selecting the items marked with	, press the
		KEYSTONE		0

ENTER button.

Available settings in the menus

Set the following items on their relevant menus.

1. IMAGE menu	SETTING		FUNCTION	1. IMAGE menu
ITEM				opt.
GAMMA MODE	AUTO		The proper gamma mode is
			automatically selected depending on	IMAGE	AV MEMORY 1
			the input signal. Default is AUTO.	GAMMA MODE	AUTO
	SPORTS		This is a bright mode suitable for
				CONTRAST	0
			watching sports images.
				BRIGHTNESS	0
	VIDEO		This is a standard mode suitable for
			watching video images, etc.	COLOR TEMP.	MEDIUM
	CINEMA		This is a mode for watching movies in	COLOR	0
	USER1	/	dim lighting as in a theater.	TINT	0
			Select to adjust the gamma curve. (See	SHARPNESS	0
CONTRAST	USER2		page 33.)	ADVANCED MENU	OK
	±30		Use to adjust the contrast of the	AV MEMORY	AV MEMORY1
			projected image. (See page 31.)	SAVE

BRIGHTNESS	±30	Use to adjust the brightness of the projected image. (See page 31.)
COLOR TEMP.	5 options	Use to adjust the color temperature. (See page 32.)
COLOR	±10	Use to adjust the color thickness of the projected image. (See page 31.)
TINT	±10	Use to adjust the color tint of the projected image. (See page 31.)
SHARPNESS	±10	Use to adjust the sharpness of the projected image. (See page 31.)
ADVANCED MENU
SCREEN SIZE	2 options	Select according to the screen size.
VERTICAL LOCATION	±26	Use to adjust the position (height) of the projected image.
AUTO IRIS	AUTO / OFF	Select the operation mode of the auto iris. (See page 32.)
TRNR	0 - 15	Use to reduce random noise. (See page 33.)
MNR	0 - 15	Use to reduce mosquito noise. (See page 33.)
BAR	ON / OFF	Use to reduce block noise. (See page 33.)
CTI	0 - 5	Use to correct smeared color boundaries.
INPUT LEVEL	±5	For analog signal input: The input level of video signal differs among devices to be
		connected. High input level causes solid white in displayed image and low input
		level causes displayed image to get dark. Use this menu to adjust the input level of
		analog video signal.
	AUTO /	For digital signal input:
	ENHANCED /	AUTO:	The proper setting is automatically selected.
	NORMAL	ENHANCED: Select when solid black occurs.
		NORMAL:	Select when grayish black occurs.
		(See page 16.)
OPTION FILTER	ON / OFF	Select ON when the separately available option filter (see page 46) is attached
		to the lens. The color temperature is corrected depending on the option filter
		attached.
AV MEMORY SAVE 3 options		Select the AV MEMORY to which you save the current setting. (See page 30.)

•By using the AV memory function, you can save up to 3 setting patterns of IMAGE menu for each input terminal. (See page 30.)

•INPUT LEVEL is unavailable when the digital signal is supplied from the YCBCR/YPBPR terminal of the connected device.

EN-26